ExamplesFree - Revision history

L.Pizzoli at 11:16, 2 May 2018

2018-05-02T11:16:46Z

L.Pizzoli at 11:07, 2 May 2018

2018-05-02T11:07:15Z

L.Pizzoli at 10:57, 2 May 2018

2018-05-02T10:57:27Z

L.Pizzoli at 10:55, 2 May 2018

2018-05-02T10:55:01Z

L.Pizzoli at 10:53, 2 May 2018

2018-05-02T10:53:05Z

L.Pizzoli at 15:50, 11 January 2018

2018-01-11T15:50:27Z

J.taddei at 08:45, 19 May 2017

2017-05-19T08:45:25Z

L.Pizzoli: Marked this version for translation

2017-05-10T13:46:50Z

Marked this version for translation

L.Pizzoli: Created page with "{{DISPLAYTITLE:Example: Expert Project|noerror}} In this page will be explained how to scana project in Expert mode. This kind of project has no wizard, so the on..."

2017-05-10T12:54:26Z

Created page with "{{DISPLAYTITLE:Example: Expert Project|noerror}} <translate> In this page will be explained how to scana project in Expert mode. This kind of project has no wizard, so the on..."

New page

{{DISPLAYTITLE:Example: Expert Project|noerror}}
<translate>

In this page will be explained how to scana project in Expert mode. This kind of project has no wizard, so the only information required for creating the project is the general information section.

{{Screenshot|prj-definition-expert.png}}

As no information has been provided, in this project there are no fixed steps, the user can scan any object in any order. In this demo project, an upper jaw and two dies have been scanned, aligned and meshed.

'''It is not necessary to follow the order of operations of this demo; still it is suggested to align the items before meshing them'''

==Upper Jaw==

To start scanning click on the '''Scan Button'''{{Inline button|scanAction.png}}. Since there are no indications on the object to be scanned, the software will ask the user to select a scanning profile and, if needed, some advanced options. To learn more on the advanced parameters, go to the [[Scan|Scan Interface]] '''page -paragraph Advanced parameters'''.

Here is our scan definition:

[[File:start-scan-expert.gif]]

Once the profile has been selected the upper model scan can be started. Place the model on the model holder and click the '''Scan Button'''{{Inline button|scanAction.png}}. Once the scan is finished the result will be shown.

[[File: upper-expert-steps.png]]

Also in the Expert project, the steps are divided in different moments, by clicking the next button {{Inline button|nextAction.png}} the edit mode activates. Edito or trim the model using the available tools and click next. For detailed information on all the available options in this step visit the [[Edit|Edit Tools]] page.

To start another scan, click on the Scan button{{Inline button|scanAction.png}}.

== Dies ==

In the Expert project it is not possible to use the multidie, since the software doesn0t know which items will be scanned. Therefore the dies can be scanned in any possible way and combination. In our demo project we have two dies, and we'll proceed scannign them both on the model holder. To start the scan, the rofile needs to be selected:

[[File: scan-stups-expert.gif]]

At this point, the scan can be started. Place the dies on the chosen support and click the '''Scan Button'''{{Inline button|scanAction.png}}. Once the scan is finished the result will be shown.

[[File: stumps-expert-steps.png]]

As for the previous item, by clicking {{Inline button|nextAction.png}} the edit mode activates.

[[File:edit-stups-expert.gif]]

Two dies have been scanned together and are therefore saved in the same image. To be able to use them in a design project it is needed to separate the two items and create two different images. To do so, right click on the '''Stump''' image in the items' list and click '''Clone Item Action'''.

{{Screenshot|clone-stumps.png}}

Now edit and rename the two images, leav ing only one element per image.

[[File:separate-stumps-expert.gif]]

When all the items are in separate images, they can be aligned to their reference.

==Alignment==

Since this project doens't have a structure, the software cannot start the alignment automatically. The user needs to select the items to align and their reference.

[[File:align-expert.gif]]

All the items are now in position and the user can start editing the images for mesh generation.

==Reference Editing==

The reference editing is very important because it avoids exporting double surfaces to the CAD and consequential errors during design. In Structured projects this step is completely automatic.

To delete double surfaces, click on the reference image (in this case the upper model) in the items' list and edit out the parts that were scanned separatedly.

[[File:edit-helthy-expert.gif]]

Once all reference images have been edited the mesh can be generated.

==Mesh Generation==

As for the scans, different items get meshed in different ways. The user has to select a meshing profile for each item.

[[File:mesh-gen-expert.gif]]

To then Export the generated meshes, right click on the meshed elements in the items' list and select '''Export Items'''. The software will ask the user to select the folder for the export.

</translate>
{{Navigation|ExamplesMultidie|Calibrations}}

@@ Line 39: / Line 39: @@
 <!--T:13-->
-In the Expert project, it is not possible to use the multi-die, since the software doesn't know which items will be scanned. Therefore the dies can be scanned in any possible way and combination. In our demo project, we have two dies, and we'll proceed to scan them both on the model holder.<br />To start the scan, the profile needs to be selected:
+In the Free project, it is not possible to use the multi-die, since the software doesn't know which items will be scanned. Therefore the dies can be scanned in any possible way and combination. In our demo project, we have two dies, and we'll proceed to scan them both on the model holder.<br />To start the scan, the profile needs to be selected:
 <!--T:14-->

@@ Line 23: / Line 23: @@
 <!--T:8-->
-[[File:start-scan-expert.gif]]
+[[File:start-scan-free.gif]]
 <!--T:9-->

@@ Line 6: / Line 6: @@
 <!--T:2-->
-{{Screenshot|prj-definition-expert.png}}
+{{Screenshot|prj-definition-free.png}}
 <!--T:3-->

@@ Line 3: / Line 3: @@
 <!--T:1-->
-In this page will be explained how to scan a project in Expert mode. This kind of project has no wizard, so the only information required for creating the project is the general information section.
+In this page will be explained how to scan a project in Free mode. This kind of project has no wizard, so the only information required for creating the project is the general information section.
 <!--T:2-->

@@ Line 9: / Line 9: @@
 <!--T:3-->
-As no information has been provided, in this project there are no fixed steps, the user can scan any object in any order. <br /> In this demo project, an upper jaw and two dies have been scanned, aligned and meshed.
+As no information has been provided, in this project there are no fixed steps, the user can scan any object in any order. <br /> In this demo project, an upper jaw, and two dies have been scanned, aligned and meshed.
 <!--T:4-->
-'''It is not necessary to follow the order of operations of this demo; still it is suggested to align the items before meshing them'''
+'''It is not necessary to follow the order of operations of this demo; still, it is suggested to align the items before meshing them'''
 ==Upper Jaw== <!--T:5-->
@@ Line 32: / Line 32: @@
 <!--T:11-->
-Also in the Expert project, the steps are divided in different moments, by clicking the next button {{Inline button|nextAction.png}} the edit mode activates.<br /> Edit or trim the model using the available tools and click next. For detailed information on all the available options in this step visit the [[Edit|Edit Tools]] page.
+Also in the Expert project, the steps are divided into different moments, by clicking the next button {{Inline button|nextAction.png}} the edit mode activates.<br /> Edit or trim the model using the available tools and click next. For detailed information on all the available options in this step visit the [[Edit|Edit Tools]] page.
 To start another scan, click on the Scan button{{Inline button|scanAction.png}}.
@@ Line 39: / Line 39: @@
 <!--T:13-->
-In the Expert project it is not possible to use the multidie, since the software doesn't know which items will be scanned. Therefore the dies can be scanned in any possible way and combination. In our demo project we have two dies, and we'll proceed scanning them both on the model holder.<br />To start the scan, the profile needs to be selected:
+In the Expert project, it is not possible to use the multi-die, since the software doesn't know which items will be scanned. Therefore the dies can be scanned in any possible way and combination. In our demo project, we have two dies, and we'll proceed to scan them both on the model holder.<br />To start the scan, the profile needs to be selected:
 <!--T:14-->
@@ Line 57: / Line 57: @@
 <!--T:19-->
-Two dies have been scanned together and are therefore saved in the same image. To be able to use them in a design project it is needed to separate the two items and create two different images. <br /> To do so, right click on the '''Stump''' image in the items' list and click '''Clone Item Action'''.
+Two dies have been scanned together and are therefore saved in the same image. To be able to use them in a design project it is needed to separate the two items and create two different images. <br /> To do so, right-click on the '''Stump''' image in the items' list and click '''Clone Item Action'''.
 <!--T:20-->
@@ Line 74: / Line 74: @@
 <!--T:25-->
-Since this project doens't have a structure, the software cannot start the alignment automatically. The user needs to select the items to align and their reference.
+Since this project doesn't have a structure, the software cannot start the alignment automatically. The user needs to select the items to align and their reference.
 <!--T:26-->

@@ Line 1: / Line 1: @@
-{{DISPLAYTITLE:Example: Expert Project|noerror}}
+{{DISPLAYTITLE:Example: Free Project|noerror}}
 <translate>
@@ Line 107: / Line 107: @@
 </translate>
-{{Navigation|ExamplesMultidie|Calibrations}}
+{{Navigation|ExamplesMultidie|ExamplesExpert}}

@@ Line 3: / Line 3: @@
 <!--T:1-->
-In this page will be explained how to scana project in Expert mode. This kind of project has no wizard, so the only information required for creating the project is the general information section.
+In this page will be explained how to scan a project in Expert mode. This kind of project has no wizard, so the only information required for creating the project is the general information section.
 <!--T:2-->
@@ Line 32: / Line 32: @@
 <!--T:11-->
-Also in the Expert project, the steps are divided in different moments, by clicking the next button {{Inline button|nextAction.png}} the edit mode activates.<br /> Edito or trim the model using the available tools and click next. For detailed information on all the available options in this step visit the [[Edit|Edit Tools]] page.
+Also in the Expert project, the steps are divided in different moments, by clicking the next button {{Inline button|nextAction.png}} the edit mode activates.<br /> Edit or trim the model using the available tools and click next. For detailed information on all the available options in this step visit the [[Edit|Edit Tools]] page.
 To start another scan, click on the Scan button{{Inline button|scanAction.png}}.
@@ Line 39: / Line 39: @@
 <!--T:13-->
-In the Expert project it is not possible to use the multidie, since the software doesn0t know which items will be scanned. Therefore the dies can be scanned in any possible way and combination. In our demo project we have two dies, and we'll proceed scannign them both on the model holder.<br />To start the scan, the rofile needs to be selected:
+In the Expert project it is not possible to use the multidie, since the software doesn't know which items will be scanned. Therefore the dies can be scanned in any possible way and combination. In our demo project we have two dies, and we'll proceed scanning them both on the model holder.<br />To start the scan, the profile needs to be selected:
 <!--T:14-->
@@ Line 63: / Line 63: @@
 <!--T:21-->
-Now edit and rename the two images, leav ing only one element per image.
+Now edit and rename the two images, leaving only one element per image.
 <!--T:22-->
@@ Line 88: / Line 88: @@
 <!--T:30-->
-To delete double surfaces, click on the reference image (in this case the upper model) in the items' list and edit out the parts that were scanned separatedly.
+To delete double surfaces, click on the reference image (in this case the upper model) in the items' list and edit out the parts that were scanned separately.
 <!--T:31-->

@@ Line 2: / Line 2: @@
 <translate>
 In this page will be explained how to scana project in Expert mode. This kind of project has no wizard, so the only information required for creating the project is the general information section.
 {{Screenshot|prj-definition-expert.png}}
 As no information has been provided, in this project there are no fixed steps, the user can scan any object in any order. <br /> In this demo project, an upper jaw and two dies have been scanned, aligned and meshed.
 '''It is not necessary to follow the order of operations of this demo; still it is suggested to align the items before meshing them'''
-==Upper Jaw==
+==Upper Jaw== <!--T:5-->
 To start scanning click on the '''Scan Button'''{{Inline button|scanAction.png}}. Since there are no indications on the object to be scanned, the software will ask the user to select a scanning profile and, if needed, some advanced options. To learn more on the advanced parameters, go to the [[Scan|Scan Interface]] '''page -paragraph Advanced parameters'''.
 Here is our scan definition:
 [[File:start-scan-expert.gif]]
 Once the profile has been selected the upper model scan can be started. <br />Place the model on the model holder and click the '''Scan Button'''{{Inline button|scanAction.png}}. Once the scan is finished the result will be shown.
 [[File: upper-expert-steps.png]]
 Also in the Expert project, the steps are divided in different moments, by clicking the next button {{Inline button|nextAction.png}} the edit mode activates.<br /> Edito or trim the model using the available tools and click next. For detailed information on all the available options in this step visit the [[Edit|Edit Tools]] page.
 To start another scan, click on the Scan button{{Inline button|scanAction.png}}.
-== Dies ==
+== Dies == <!--T:12-->
 In the Expert project it is not possible to use the multidie, since the software doesn0t know which items will be scanned. Therefore the dies can be scanned in any possible way and combination. In our demo project we have two dies, and we'll proceed scannign them both on the model holder.<br />To start the scan, the rofile needs to be selected:
 [[File: scan-stups-expert.gif]]
 At this point, the scan can be started. Place the dies on the chosen support and click the '''Scan Button'''{{Inline button|scanAction.png}}. Once the scan is finished the result will be shown.
 [[File: stumps-expert-steps.png]]
 As for the previous item, by clicking {{Inline button|nextAction.png}} the edit mode activates.
 [[File:edit-stups-expert.gif]]
 Two dies have been scanned together and are therefore saved in the same image. To be able to use them in a design project it is needed to separate the two items and create two different images. <br /> To do so, right click on the '''Stump''' image in the items' list and click '''Clone Item Action'''.
 {{Screenshot|clone-stumps.png}}
 Now edit and rename the two images, leav ing only one element per image.
 [[File:separate-stumps-expert.gif]]
 When all the items are in separate images, they can be aligned to their reference.
-==Alignment==
+==Alignment== <!--T:24-->
 Since this project doens't have a structure, the software cannot start the alignment automatically. The user needs to select the items to align and their reference.
 [[File:align-expert.gif]]
 All the items are now in position and the user can start editing the images for mesh generation.
-==Reference Editing==
+==Reference Editing== <!--T:28-->
 The reference editing is very important because it avoids exporting double surfaces to the CAD and consequential errors during design.<br /> In Structured projects this step is completely automatic.
 To delete double surfaces, click on the reference image (in this case the upper model) in the items' list and edit out the parts that were scanned separatedly.
 [[File:edit-helthy-expert.gif]]
 Once all reference images have been edited the mesh can be generated.
-==Mesh Generation==
+==Mesh Generation== <!--T:33-->
 As for the scans, different items get meshed in different ways. The user has to select a meshing profile for each item.
 [[File:mesh-gen-expert.gif]]
 To then Export the generated meshes, right click on the meshed elements in the items' list and select '''Export Items'''. The software will ask the user to select the folder for the export.
 </translate>
 {{Navigation|ExamplesMultidie|Calibrations}}