Accessories/ro

Accesorii

Scanerele Open Technologies NeWay vin cu un set fix de accesorii de bază. Unele accesorii suplimentare sunt de asemenea disponibile, în funcție de cerințele specifice.

Base Kit

Kitul de bază este livrat împreună cu fiecare scaner, în interiorul carcasei, care conține suportul modelului, suportul multi-die, setul de calibrare, inelul de referință și placa de articulație.

Model Holder

Suportul de model este suportul principal pe care este posibil să plasați modelele sau alte obiecte în interiorul scanerului. Dacă sunt montate pe acest suport, obiectele sunt garantate în cea mai bună poziție posibilă pentru achiziția scanerului.

Este important să păstrați suportul modelului curat și negru pentru a reduce eventualele interferențe dintre suportul modelului și obiect în timpul fazei de achiziție.

Multi-Die Support

The Multi-Die support is used to acquire multiple stumps with a single acquisition. The position are later automatically identified by the software.

It's important to keep the Multi-Die clean and black to reduce the possible interferences between the Multi-Die and the object during the acquisition phase.

Calibration Kit

The Calibration Kit is a planar surface with a pattern of circles, placed on a bended support.
Every calibration kit is measured and analized with high-precision machines.
The measurement is then saved on a xml file and every kit has it's own xml description file.
The kit is used to recalibrate the optical head of the scanner.

It's really important to handle the kit with care and to avoid touching the planar surface. Every modification of the planar surface, like scratches or dirt, can make the calibration system unreliable.

Reference Rim

The Reference Rim offers reference points to grant accurate dimensional results during the scanning process. Allthough dimensional accuracy is granted for the vast majority of all objects, in case of scanning small metalic objects, such as metal abutments, or other difficult materials, the Reference Rim offers even better results and safety.

Articulator Plate

The Articulator plate allows to scan any kind of articulator in the NeWay scanner, thanks to its ample diameter.

Dynamic Articulation Module

In order to use the dynamic articulation module, some special supports are needed: a specific Axis Calibration Object and a special Mounting Plate for every supported articulator.

Mounting Plates

Up to the present, our dynamic articulation module supports 6 different mounting plates.

• Artex :
• Kavo :
• Adesso :
• Sam :
• Bioart :
• Denar :

Axis Calibration Object

This is a specific object, which fits on every mounting plate, used to calibrate the movement system for the Dynamic Articulation Module.

It's important to keep the object clean and handle it with care. Every modification of the object surface, like scratches or dirt, can make the calibration system unreliable.

Concept Quad Support

The Concept Quad Support is provided together with the additional Concept Quad Scanning Module and it allows to place two antagonist quadrant models and their stumps in the scanner to be scanned in together at the same time.

It's important to keep the model holder clean and black to reduce the possible interferences between the model holder and the object during the acquisition phase.

Accessories Tray

All these accessories can be kept and organised in Open Technologies Accesories' tray.