{{Inline button|Key_shift.png}} を押しながら歯をクリックすると、最後の設定パラメータが、最後の歯と選択された歯の間のすべての歯にコピーされます。を押しながら歯をクリックすると、その前の設定パラメータが、最後の歯と選択された歯の間にあるすべての歯にコピーされます。 The connector dots become available when an item has a waxup as an accessory scan. Click on the dot to change its status: ''green'' = connected; ''grey'' = not connected.
Once all the information has been filled in, select すべての情報を入力したら、'''Ok''' to accept the data or を選択してデータを確定するか、'''Cancel''' to discard を選択して変更内容を破棄し、プロジェクト定義ページに戻ります。 ==Movement Marker== Select the changes and go back '''Movement Marker''' box if you want to scan this kind of object for combining the project definition pageCAD with a Digital Jaw Movement system like ZEBRIS. {{Screenshot|movmark_section.png}}
==Model Typesモデルタイプ==
This section allows to choose the kind of model that will be scanned.このセクションでは、スキャンするモデルの種類を選択できます。
{{Screenshot|model_section.png}}
By clicking on the model image, a model selection panel opens.モデルの画像をクリックすると、モデル選択パネルが開きます。
[[File:model_type.PNG]]
The available choices are:以下の選択肢があります。
<div class="mw-translate-fuzzy">; {{List button|unsectionedModel.png}} Unsectioned Model 非分割模型 : enable this option if the model to be scanned is not sectioned, the scanner will not require a separate scan for every die. スキャンするモデルが分割されていない場合、このオプションを選択します。スキャナーでは各ダイを別々にスキャンする必要はありません。 ; {{List button|normalModel.png}} Sectioned Model 分割模型 : default workflow, in which every element is acquired separately and all the information gets merged at the end.デフォルトのワークフローで、すべての部品が別々に取得され、すべての情報は最後にマージされます。; {{List button|quadrantModel.png}} Quadrant Model 片顎模型 : if the ''Concept Quad Scan Moduleコンセプトクアッドスキャンモジュール'' is enabled, it is possible to scan all the parts of a Quadrant Tray in just one step.が有効の場合、クオドラントトレーのすべての部品を1回でスキャンすることが可能です。; {{List button|impressionModel.png}} Impression Scan インプレッションスキャン : if the ライセンスで''Impression Scan Moduleインプレッションスキャンモジュール'' is enabled in the license, check this option to scan an impression and not a stone model.が有効の場合、このオプションにチェックを入れると、石膏模型ではなく印象をスキャンできます。</div>
==CAD IntegrationCAD統合==
When the project is started directly from Exocad, the STL files produced in the scanning process will be transmitted to Exocad in just one click. On the other end, if the project gets created in the scanning software, the automatic export to CAD will not be configured, unless it is selected in this section.プロジェクトをExocadから直接開始すると、スキャンプロセスで生成されたSTLファイルは、クリックするだけでExocadに送信されます。逆に、スキャンソフトウェアでプロジェクトが作成された場合、CADへの自動エクスポートは設定されません。これを設定にするには、このセクションで選択する必要があります。
{{Screenshot|Cad_section.png}}
By clicking on the '''No CAD''' box the CAD selection window opensをクリックすると、CAD選択ウインドウが開きます。
[[File:Cad_selection.PNG]]
and it allows to choose one of the software integrated with our scanning system for automatic trasmission of the STL information.このスキャンソフトウェアでSTL情報を自動送信できるよう統合されているいずれかのソフトウェアを選択できます。
If '''No Cad''' is selected, the software will then ask the user to define an export path for the STL files.が選択されている場合、STLファイルのエクスポートパスを定義するようソフトウェアに求められます。
==Articulators咬合器==
The last section allows to select an articulator to use the 最後のセクションでは、''Dynamic Articulation Moduleダイナミックアーティキュレーションモジュール''. で使用する咬合器を選択します。
{{Screenshot|Arti_section.png}}
'''If the Dynamic Articulation module is not active on the license this section will not be availableライセンスでダイナミックアーティキュレーションモジュールが有効でない場合、このセクションは利用できません'''
[[File:Articulator_selection.PNG]]
Remember that '''it is always possible to scan any kind of articulatorどのような種類の咬合器でも常にスキャンできる''', this section is only to be used if you want to scan with the dynamic articulation module and pass the occlusion position in the Virtual Articulator of Exocad.ことを覚えておいて下さい。このセクションは、ダイナミックアーティキュレーションモジュールを使ってスキャンし、Exocadのバーチャルアーティキュレーターでの咬合位置として利用したい場合にのみ使用されます。
The Articulators available in Exocad and therefore in our software are:Exocadおよびこのソフトウェアで利用可能な咬合器は以下の通りです。
; {{List button|artex.png}} Artex : to scan the Artex Articulator and to use the same in Exocad's Virtual ArticulatorArtexの咬合器をスキャンして、それをExocadのバーチャルアーティキュレーターで使用する場合; {{List button|sam.png}} Sam/ Adesso : to scan the Sam Articulator or the Adesso splitcast and to use the same in Exocad's Virtual ArticulatorSamの咬合器またはAdessoスプリットキャストを使用して、それをExocadのバーチャルアーティキュレーターで使用する場合; {{List button|a7.png}} Protar- Kavo : to scan the Kavo Articulator and to use the same in Exocad's Virtual ArticulatorKavoの咬合器をスキャンして、それをExocadのバーチャルアーティキュレーターで使用する場合; {{List button|protar.png}} A7 - Bioart : to scan the Bioart Articulator and to use the same in Exocad's Virtual ArticulatorBioartの咬合器をスキャンして、それをExocadのバーチャルアーティキュレーターで使用する場合; {{List button|denar.png}} Denar by Whipmix : to scan the Denar Articulator and to use the same in Exocad's Virtual ArticulatorDenarの咬合器をスキャンして、それをExocadのバーチャルアーティキュレーターで使用する場合
To start the project accept the definition with the プロジェクトを開始するには、{{Inline button|Ok.png}} button.ボタンで定義を確定します。
To find specific information on how to scan Prosthesis cases, go to the 補綴ケースをスキャンする方法について詳しくは、[[ExamplesCemented|Prosthesis Project補綴プロジェクト]] or または[[ExamplesImplants|Prosthesis Project on Implantsインプラントでの補綴プロジェクト]] example pages.例のページを参照して下さい。