Edit/ja

構造

各スキャン手順を完了すると、咬合器の場合を除き、ウィザードインターフェースで画像編集ステップが表示されます。このステップでは、下部のツールバーでツールやアクションを選択できます。

ほかに、マーカーやダイを識別する編集ステップもあります（マルチダイではなくカスタムステップでスキャンする場合）。

Edit Toolbar

戻る

前のステップに戻ります。このアイコンは、最初のスキャンステップでは無効になっています。

選択ツール

選択ツールパネルを開きます。このパネルでは、画像の一部分を選択する方法を選択できます。利用可能なツールについては、後続のセクションで説明します。

選択アクション

アクション選択パネルを開きます。このパネルでは、画像で選択した部分でどのような操作を実行するか選択できます。利用可能なアクションについては、後続のセクションで説明します。

ベースのカット

オブジェクトのベースを水平にカットします。このツールについては、後続のセクションで説明します。

次へ

プロジェクト内の次のステップに進みます。このアイコンは、実行中のステップが完了している、またはスキップできる場合に利用できます。

選択ツール

As shown in the GIF, these tools allow to select part of the image to edit the object. Four selection tools are available:

Rectangular Selection

Draws a rectangle that starts from the click point and grows following the mouse; to select, release the left mouse button.

Elliptical Selection

Draws an ellipse centered in the click point that grows following the mouse; to select, release the left mouse button.

Free Closed Line Selection

Click and hold the left mouse button to start drawing a line that follows the mouse. Release the left mouse button to close the line and select all the area inside its borders.

Polygonal Selection

Click in two different points to draw a line and a third point to create a polygon. Double click to close the polygon and select all the area inside its borders

Actions

These actions allow to modify the selected information. The following actions are available:

Delete Selection (DEL) 

Deletes the currently selected data.

Crop Selection ( + K) 

Keeps only the selected data and removes all the rest.

Invert Selection ( + I) 

Selects all the data that is not selected and deselects the selected data.

Clear Selection ( + C) 

Deselects all the data.

Cut Base

To use the Base Cut tool, click on the button then, either click on the model or drag the cursor to determine the height of the cut. Click Apply to accept the changes. Here below an explanatory video.

Dies identification

When scanning dies using the custom setup, as shown in the Scan Interface page, the dies need to be identified.

The interface shows a specific main toolbar, a teeth graphic on the right showing the elements that need to be identified. Before the identification the dies are marked in yellow, the item marked with the red border is the one that needs to be identified and separated from the others. The wizard will underline all the items in an established sequence, the user can select manually the item to be identified by left clicking on its number in the teeth graph.

The main toolbar offers these tools:

Previous

Goes back to the previous step. Icon not active during the first scanning step.

Selection Tools

Opens the selection tool panel in which it is possible to choose how to select part of the image. The available tools will be described later in this page.

Extraction

Extracts the image of the selected die from the general scan, thus identifying and separating it from the others.

Select Action

Opens the actions panel in which it is possible to choose what to do with the selected part of the image. The available actions will be described later in this page.

Next

Goes forward one step in the project. This option is not available untill all the items have been identified and separated.

Once the items have been identified and separated, they are marked in green in the graph. In case an error occurs during identification and two or more stumps get mixed up, it is possible to restart the identification by clicking on one of the icon.

Marker identification

When scanning implant cases, the user needs to use markers as reference for the position of the implant. Once scanned, each marker needs to be identified and separated from the others.

The interface shows a specific main toolbar, a teeth graphic on the right showing the elements that need to be identified. Before the identification the teeth are marked in yellow, the item marked with the red boder is the one that needs to be identified and separated from the others. The wizard will underline all the items in an established sequence, the user can select manually the item to be identified by left clicking on its number in the teeth graph.

The main toolbar offers these tools:

Previous

Goes back to the previous step. Icon not active during the first scanning step.

Selection Tools

Opens the selection tool panel in which it is possible to choose how to select part of the image. The available tools will be described later in this page.

Extraction

Extracts the image of the selected die from the general scan, thus identifying and separating it from the others.

Select Action

Opens the actions panel in which it is possible to choose what to do with the selected part of the image. The available actions will be described later in this page.

Next

Goes forward one step in the project. This option is not available untill all the items have been identified an separated.

Once the items have been identified and separated, they are marked in green in the graph. In case an error occurs during identification and two or more markers get mixed up, it is possible to restart the identification by clicking on one of the icon.