Mesh/ja

構造

プロジェクトの最後のステップでは、生成されたメッシュが表示され、これを編集したりエクスポートしたりできます。

インターフェースに生成されたすべてのメッシュの画像が表示されます。右上には生成されたメッシュのリストがあり、ここで個々のファイルを選択して編集できます。ツールバーもあります。

ツールバーには以下のオプションがあります：

Previous

Goes back to the previous step. Icon not active during the first scanning step.

Edit Meshes

Opens the mesh editing page that provides various tools to improve the quality of the mesh. All of these tools will be explained in detail later in this page.

Export to CAD 

Exports the images to the selected CAD.

Export Visible 

Exports the files to a selected folder.

Next

Goes one step forward in the project. This option is not available, being this the last wizard step.

Mesh Tools

By clicking the the edit mesh toolbar becomes available. The mesh tools are automatically applied in some measure during mesh generation, it is seldom necessary to furtherly edit the mesh.

Exit

Exits the Option section.

Selection Tools

Opens the selection tool panel in which it is possible to choose how to select part of the image. The available tools will be described later in this page.

Select Action

Opens the actions panel in which it is possible to choose what to do with the selected part of the image. The available actions will be described later in this page.

Fill Holes

Detects and filles one or more holes in a mesh. This option will be explained in detail later in this page.

Flip Normals

Flips the normals of the mesh inverting the upper surface with its bottom part. This tool is automatically performed in the impression and bite profiles.

Fix Mesh

Automatically detects and fixes the structural issues of a mesh, if there are any.

Smooth

Advanced tool to smooth and sharpen a mesh. This option will be explained in detail later in this page.

Decimate

Reduces the number of triangles of a mesh, and incidentally the weight of the generated STL file. This option will be explained in detail later in this page.

Accept

Accepts the changes and closes the option section.

Selection Tools

As shown in the GIF, these tools allow to select part of the image to edit the object. Four selection tools are available:

Rectangular Selection

Draws a rectangle that starts from the click point and grows following the mouse; to select, release the left mouse button.

Elliptical Selection

Draws an ellipse centered in the click point that grows following the mouse; to select, release the left mouse button.

Free Closed Line Selection

Click and hold the left mouse button to start drawing a line that follows the mouse. Release the left mouse button to close the line and select all the area inside its borders.

Polygonal Selection

Click in two different points to draw a line and a third point to create a polygon. Double click to close the polygon and select all the area inside its borders

Actions

These actions allow to modify the selected information. The following actions are available:

Delete Selection (DEL) 

Deletes the currently selected data.

Crop Selection ( + K) 

Keeps only the selected data and removes all the rest.

Invert Selection ( + I) 

Selects all the data that is not selected and deselects the selected data.

Clear Selection ( + C) 

Deselects all the data.

Fill All Holes

This is an interactive tool that allows to fill the holes in the currently selected mesh.

As shown in the video, drag the bar to choose the size of the holes that need to be filled. The holes contour will turn red when they are selected. Click apply to accept and fill the selected holes.

Smooth

This tool smooths the whole surface of the mesh, compensating its irregularities, if there are any.

This tool applies two parameters:

Strength

How much the tool can change the object surface. The higher the value the more the mesh is smoothed and sharpened.

Sensitivity

How many parts of the surface will be identified as 'Details' (margins, edges). The detail parts will be sharpened, but not smoothed.

Decimate

This tool reduces the number of triangles in a mesh, to save more space, trying to preserve as much detail as possible.

It is possible to insert a percentage of triangles to be kept (For example 50% to halve the mesh size).

It is also possible to establish a tolerance value. If the tolerance is enabled, the software will stop the decimation when this would modify the mesh more than the tolerance parameter.

On the bottom of the dialog appears the initial number of triangles (or Faces) and the number of triangles after decimation.

Just click on Apply to see the result.