Export translations

Settings

Group

Language

Format

Export for off-line translation

Export in native format

The first icon in the [[NewPrj|Project Creation]] page opens the Prosthesis Project definition.
 
{{Screenshot|Pro-project.PNG}}

The Project definition window is divided into 5 sections.

==Tooth Definition==

The first window on the left ''Teeth'' allows to select the items that will be scanned, their options and accessory scans.

By clicking on a element, the tooth definition panel opens.

[[File:tooth selection.png]]

The possible choices are:

;{{List button|none.png}}                None             : Doesn't mark the tooth as part of the project and closes the tooth definition panel to go back to the previous step.
;{{List button|healthy.png}}             Healthy             : Marks the tooth as healthy element. This tooth is part of the main stone model, it can be acquired with the rest of the model. If used on a completely healthy oppposing jaw, it sets the project to scan an opposing stone model.
;{{List button|Die.png}}                 Die             : Marks the tooth as a prepared die. This tooth is a removable die that has to be acquired alone or on the Multi-Die support.
;{{List button|Implant-def.png}}             Implant             : Signals that in the established position there is an implant, and a marker will be scanned.
;{{List button|Antagonist.png}}          Bite Antagonist             : Marks that the selected tooth is part of a silicon bite. To set a stone model as antagonist use '''healthy'''.
;{{List button|Pontic.png}}              Pontic             : Marks the tooth as pontic element of a bridge.

If an elements is marked as '''Die''', '''Implant''' or '''Pontic''', further options are made available:

[[File:opzionidente.PNG]]

;{{List button|waxupIcon.png}}            Waxup              : Indicates that on the selected tooth there is a Waxup element to be scanned.
;{{List button|situIcon.png}}             Situ               : Indicates that for the selected tooth there is a situ or pre operative model that has to be scanned.
;{{List button|gingivaIcon.png}}          Gingiva            : Indicates that the selected element also has a gingiva item that will be scanned separately.

Once the tooth category has been defined, and the options selected, accept with '''Ok''' or discard the changes with '''Cancel'''.

By holding {{Inline button|Key_ctrl.png}} when clicking on a tooth, the last defined element type will be copied to the selected tooth.

By holding {{Inline button|Key_shift.png}} when clicking on a tooth, the last set parameters will be copied to all the teeth between the last tooth and the selected one.

The connector dots become available when an item has a waxup as an accessory scan. Click on the dot to change its status: ''green'' = connected; ''grey'' = not connected.

==Project==

The Project section allows the user to input some '''General Information''':

* Patient's name
* Doctor's name (Optional)
* Notes (Optional)
* A check box to decide whether or not to use the Reference Rim.

It is possible to write freely in the Doctor and Notes boxes. As for the Patient, it is possible to:

*write freely in the box 
*Create a new profile clicking on the ''Search/Create'' button
*Search the database for an already existing profile clicking on the ''Search/Create'' button

The '''Search/Create Button''' opens the following window:

[[File:search.PNG]]

This window allows to search the project database for already existing patients. A filter can be applied and, for those who use VDDS protocols, the research can be restricted to that specific database.

By clicking on the ''Create'' button, the following window opens:

[[File:create_patient.PNG]]

The patient creation panel allows to input general information regarding the patient and the treatment, such as:

*The patient's name
*The patient's birth date
*The patient's sex
*The doctor's name
*The patient's insurance ID, where applies
*Some notes

Once all the information has been filled in, select '''Ok''' to accept the data or '''Cancel''' to discard the changes and go back to the project definition page.

==Movement Marker==

Select the '''Movement Marker''' box if you want to scan this kind of object for combining the CAD with a Digital Jaw Movement system like ZEBRIS.

==Model Types==

This section allows to choose the kind of model that will be scanned.

By clicking on the model image, a model selection panel opens.

[[File:model_type.PNG]]

The available choices are:

; {{List button|unsectionedModel.png}}            Unsectioned Model : enable this option if the model to be scanned is not sectioned, the scanner will not require a separate scan for every die. 
; {{List button|normalModel.png}}                 Sectioned Model : default workflow, in which every element is acquired separately and all the information gets merged at the end.
; {{List button|quadrantModel.png}}               Quadrant Model : if the ''Concept Quad Scan Module'' is enabled, it is possible to scan all the parts of a Quadrant Tray in just one step. Both sectioned and unsectioned quadrant models are supported.
; {{List button|impressionModel.png}}             Impression Scan : check this option to scan an impression and not a stone model. It is also possible, choosing the right option, to scan an impression and stone dies.

==CAD Integration==

When the project is started directly from Exocad, the STL files produced in the scanning process will be transmitted to Exocad in just one click. On the other end, if the project gets created in the scanning software, the automatic export to CAD will not be configured, unless it is selected in this section.

By clicking on the '''No CAD''' box the CAD selection window opens

[[File:Cad_selection.PNG]]

and it allows to choose one of the software integrated with our scanning system for automatic trasmission of the STL information.

*Exocad
*DWOS
*3Shape
*VDDS protocol (for orthodontics)
*Onyx Ceph (for orthodontics)

If '''No Cad''' is selected, the software will then ask the user to define an export path for the STL files.

==Articulators==

The last section allows to select an articulator to use the ''Dynamic Articulation Module''.

'''If the Dynamic Articulation module is not active on the license this section will not be available'''

[[File:Articulator_selection.PNG]]

Remember that '''it is always possible to scan any kind of articulator''', this section is only to be used if you want to scan with the dynamic articulation module and pass the occlusion position in the Virtual Articulator of Exocad.

The Articulators available in Exocad and therefore in our software are:

; {{List button|artex.png}}        Artex : to scan the Artex Articulator and to use the same in Exocad's Virtual Articulator
; {{List button|sam.png}}          Sam/ Adesso : to scan the Sam Articulator or the Adesso splitcast and to use the same in Exocad's Virtual Articulator
; {{List button|a7.png}}           Protar- Kavo : to scan the Kavo Articulator and to use the same in Exocad's Virtual Articulator
; {{List button|protar.png}}       A7 - Bioart : to scan the Bioart Articulator and to use the same in Exocad's Virtual Articulator
; {{List button|denar.png}}        Denar by Whipmix : to scan the Denar Articulator and to use the same in Exocad's Virtual Articulator

To start the project accept the definition with the {{Inline button|Ok.png}} button.

To find specific information on how to scan Prosthesis cases, go to the [[ExamplesCemented|Prosthesis Project]] or [[ExamplesImplants|Prosthesis Project on Implants]] example pages.