Export translations

Settings

Group
Language
Format	Export for off-line translation Export in native format

==结构==
向导结构根据项目定义生成；因此它会改变以适应任何特定项目需要扫描的元素。

Each icon of the step list represents a scanning group or a project action. In the following image, we find all the scanning groups and actions that can appear in standard projects, although it is unlikely of them to be found all in the same one.

[[FIle:Items_list.PNG]]

=扫描组=

下面是标准项目中可用的扫描组，以及特殊项目中可用的其他可能扫描组和项目（单侧四模块/印模等）
==颚==

第一组包含将用作其他扫描的参考的所有元素。点击{{Inline button|JawGroup.png}}图标，该组将打开，并显示各个步骤。

[[File:items_list_Jaw.png]]

* {{List button|Op acquisition.png}}咬合架扫描或咬合扫描：可以通过扫描咬合架支撑板上的任何咬合架，或通过扫描位于正常模型支架上的两个互相交叠的模型来执行该扫描。
* {{List button|Op acquisition-jaw.png}}模型扫描，上颚或下颚：如果两个模型都需要扫描，则通常先扫描下颚模型。对于这种扫描，需要将模型插入扫描仪'''无硅龈、标记、预备品或蜡型。
* {{List button|Op acquisition-waxup.png}}蜡型参考采集：需要在模型顶部扫描蜡型参考以获取位置参考。

==种植体==

在这个组中{{Inline button|ImplantGroup.png}}需要所有需要扫描的标记元素来采集种植体的位置。

[[File:Items_list_Implants.png]]
 
*{{List button|Op acquisition-implant.png}} Marker acquisition: the markers need to be scanned on top of the analogs of the model to register the correct position of the implants. It is possible to scan multiple markers at the same time.

==代型==

在{{Inline button|StumpGroup.png}}组中，要求扫描项目中存在的代型。

[[File:Items_list_dies.png]]
 
*{{List button|op_multiacquisetup.png}} Multi die preparation: the user is required to accept the scan configuration for the dies or to create a new scan order.
*{{List button|Op_acquisition-stump.png}} Dies acquisition: the dies can be scanned either on the multi-die or on the normal model holder.

==各种==

各种组（这里用{{Inline button|GingivaIcon.png}}图标代表）收集项目的所有周边元素，并非所有这些元素都是绝对必要的，但在项目中添加有价值的信息。

[[File:items_list_various.png]]

*{{List button|op_acquisition-healthy.png}} Healthy teeth: scan of the healthy, adjacent and pontic elements of one model. This scan is actually copied from the first acquired image of the model, therefore, it is seldom necessary for the user to scan these parts again.
*{{List button|op_acquisition-gingiva.png}} Gingiva Scan: scan of the silicon gingiva on top of the model when present.
*{{List button|op_acquisition-preop.png}} PreOp Scan: acquisition of a previous model of the patient, or previously designed anatomical part, that can be used as reference for designing the restoration.

==蜡型==

Group for the acquisition of the waxup {{Inline button|WaxupGroup.png}}, to be aligned with the reference scanned in the first group.

[[File:items_list_waxup.png]]

*{{List button|op_acquisition-waxup.png}} Waxup: detailed acquisition of the waxup. In a secondary step, it is also possible to scan the bottom part of the waxup; this step can be skipped.

==其他==

Some scan groups and items are not present in the given list because they appear only in certain conditions and with certain license modules.

===单侧咬模扫描组===

如果在[[NewPrjPro|项目定义]]中选择的模型类型是'''四分区'''{{Inline button|quadrantModel.png}），则会激活概念单侧咬模扫描组{{Inline button|quadGroup.png}}}。

*{{List button|op_acquisition-quadrant.png}}象限扫描：扫描象限托盘咬合架的元素。这些元素将一起放置在单侧咬模模组支架上，扫描仪将在一次扫描中采集上颚模型、下颚模型和最多4个代型。

===印模===

如果在[[NewPrjPro|项目定义]]中选择的模型类型为'''印模'''{{Inline button|impressionModel.png}}，则会激活印模扫描。

*{{List button|op_acquisition-impression.png}}印模扫描：扫描印模托盘。该过程所花费的时间比任何过程都长，因为要扫描负项目，需要更多的图像。

===咬蜡===

如果在[[NewPrjPro|项目定义]]中将对合牙设置为“硅咬蜡”“{{Inline button|Antagonist.png}}”，则激活咬蜡扫描。

*{{List button|op_acquisition-bite.png}}咬蜡扫描：扫描硅咬蜡。咬蜡必须放在对咬模型的顶部。

==向导操作==

===对齐===

几乎每个扫描组都会出现一个对齐图标，以将扫描的项与其参考进行匹配：

*{{List button|FreeAlignAction.png}}对齐图标：采集项后，它们将与参考对齐。至少扫描两个项之后，此选项才可用。

===标记对齐===

在种植体项目中，向导步骤之一是扫描项目与种植体库{{Inline button|markerAlignGroup.png}}的对齐。

[[File:items_list_Marker.png]]

*{{List button|markerAlignGroup.png}}标记对齐：将扫描标记/扫描体的st1与其对应的种植体库的几何形状对齐。

===完成===

[[File:items_list_finalize.png]]

完成列表和按钮{{Inline button|finalizeGroup.png}}表示已经创建网格生成并且可以导出文件时项目的最后一步。

Export translations

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Navigation

Tools

In other languages