付属品について

オープンテクノロジーのNeWayスキャナーには、基本の付属品が付いています。特定の要件によっては、その他の付属品を利用することもできます。

基本キット

基本キットはすべてのスキャナーに付属しており、基本キットのケースにはモデルホルダー、マルチダイホルダー、キャリブレーションキット、参照用リム、咬合器プレートが入っています。

モデルホルダー

モデルホルダーは、顎などのオブジェクトをスキャナー内部に設置できるメインのサポートです。モデルホルダーの上にオブジェクトを置いた場合、スキャン時に最適な位置となることが保証されます。

モデルホルダーをきれいで、黒い状態にしておくことが重要です。これによりスキャン取得段階中にモデルホルダーとオブジェクトが干渉しにくくなります。

マルチダイホルダー

The Multi-Die support is used to acquire multiple stumps with a single acquisition. The position are later automatically identified by the software.

It's important to keep the Multi-Die clean and black to reduce the possible interferences between the Multi-Die and the object during the acquisition phase.

Calibration Kit

The Calibration Kit is a planar surface with a pattern of circles, placed on a bended support.
Every calibration kit is measured and analized with high-precision machines.
The measurement is then saved on a xml file and every kit has it's own xml description file.
The kit is used to recalibrate the optical head of the scanner.

It's really important to handle the kit with care and to avoid touching the planar surface. Every modification of the planar surface, like scratches or dirt, can make the calibration system unreliable.

Reference Rim

The Reference Rim offers reference points to grant accurate dimensional results during the scanning process. Allthough dimensional accuracy is granted for the vast majority of all objects, in case of scanning small metalic objects, such as metal abutments, or other difficult materials, the Reference Rim offers even better results and safety.

Articulator Plate

The Articulator plate allows to scan any kind of articulator in the NeWay scanner, thanks to its ample diameter.

Dynamic Articulation Module

In order to use the dynamic articulation module, some special supports are needed: a specific Axis Calibration Object and a special Mounting Plate for every supported articulator.

Mounting Plates

Up to the present, our dynamic articulation module supports 6 different mounting plates.

Artex :
Kavo :
Adesso :
Sam :
Bioart :
Denar :

Axis Calibration Object

This is a specific object, which fits on every mounting plate, used to calibrate the movement system for the Dynamic Articulation Module.

It's important to keep the object clean and handle it with care. Every modification of the object surface, like scratches or dirt, can make the calibration system unreliable.

Concept Quad Support

The Concept Quad Support is provided together with the additional Concept Quad Scanning Module and it allows to place two antagonist quadrant models and their stumps in the scanner to be scanned in together at the same time.

It's important to keep the model holder clean and black to reduce the possible interferences between the model holder and the object during the acquisition phase.

Accessories Tray

All these accessories can be kept and organised in Open Technologies Accesories' tray.

Accessories

Contents