translator
5,015
edits
Changes
Created page with "付属品について"
{{DISPLAYTITLE:Accessories|noerror}}
=Accessories=
The Open Technologies' NeWay Scanners come with a fixed set of basic accessories. Some extra accessories are also available, depending on specific requirements.
==Base Kit==
The Basic Kit comes with every scanner, inside a case, containing the model holder, the multi-die holder, the calibration kit, the reference rim and the articulator plate.
===Model Holder===
The Model Holder is the main support on which it's possible to place jaws or other objects inside the scanner. If mounted on this support, the objects are guaranteed to be in the best possible position for the scanner acquisition.
;It's important to keep the model holder clean and black to reduce the possible interferences between the model holder and the object during the acquisition phase.
[[File:Model-holder.jpg|300px]]
===Multi-Die Support===
The Multi-Die support is used to acquire multiple stumps with a single acquisition. The position are later automatically identified by the software.
;It's important to keep the Multi-Die clean and black to reduce the possible interferences between the Multi-Die and the object during the acquisition phase.
[[File:Multidie-no-reference.jpg|300px]]
===Calibration Kit===
The Calibration Kit is a planar surface with a pattern of circles, placed on a bended support.<br/>
Every calibration kit is measured and analized with high-precision machines.<br/>
The measurement is then saved on a xml file and every kit has it's own xml description file. <br/>
The kit is used to recalibrate the optical head of the scanner.
;It's really important to handle the kit with care and to avoid touching the planar surface. Every modification of the planar surface, like scratches or dirt, can make the calibration system unreliable.
[[File:master.jpg|300px]]
==Reference Rim==
The Reference Rim offers reference points to grant accurate dimensional results during the scanning process. Allthough dimensional accuracy is granted for the vast majority of all objects, in case of scanning small metalic objects, such as metal abutments, or other difficult materials, the Reference Rim offers even better results and safety.
[[File:reference rim.png|300px]]
==Articulator Plate==
The Articulator plate allows to scan any kind of articulator in the NeWay scanner, thanks to its ample diameter.
[[File: piattello-articolatore.jpg|300px]]
==Dynamic Articulation Module==
In order to use the dynamic articulation module, some special supports are needed: a specific '''Axis Calibration Object''' and a special '''Mounting Plate''' for every supported articulator.
===Mounting Plates===
Up to the present, our dynamic articulation module supports 6 different mounting plates.
* Artex : [[File:basetta_artex.jpg|300px]]
* Kavo : [[File:basetta_protar.jpg|300px]]
* Adesso : [[File:basetta_adesso.jpg|300px]]
* Sam : [[File:basetta_sam.jpg|300px]]
* Bioart : [[File:basetta_a7.png|300px]]
* Denar : [[File:basetta_denar.jpg|300px]]
===Axis Calibration Object===
This is a specific object, which fits on every mounting plate, used to calibrate the movement system for the Dynamic Articulation Module.
;It's important to keep the object clean and handle it with care. Every modification of the object surface, like scratches or dirt, can make the calibration system unreliable.
[[File:oggetto-test.png|300px|]]
===Concept Quad Support===
The Concept Quad Support is provided together with the additional Concept Quad Scanning Module and it allows to place two antagonist quadrant models and their stumps in the scanner to be scanned in together at the same time.
;It's important to keep the model holder clean and black to reduce the possible interferences between the model holder and the object during the acquisition phase.
[[File:concept-quad.jpg|300px]]
===Accessories Tray===
All these accessories can be kept and organised in Open Technologies Accesories' tray.
[[File:vassoio-porta-accessori.png]]
{{Navigation|Pc_Connection|Implant_Library}}
=Accessories=
The Open Technologies' NeWay Scanners come with a fixed set of basic accessories. Some extra accessories are also available, depending on specific requirements.
==Base Kit==
The Basic Kit comes with every scanner, inside a case, containing the model holder, the multi-die holder, the calibration kit, the reference rim and the articulator plate.
===Model Holder===
The Model Holder is the main support on which it's possible to place jaws or other objects inside the scanner. If mounted on this support, the objects are guaranteed to be in the best possible position for the scanner acquisition.
;It's important to keep the model holder clean and black to reduce the possible interferences between the model holder and the object during the acquisition phase.
[[File:Model-holder.jpg|300px]]
===Multi-Die Support===
The Multi-Die support is used to acquire multiple stumps with a single acquisition. The position are later automatically identified by the software.
;It's important to keep the Multi-Die clean and black to reduce the possible interferences between the Multi-Die and the object during the acquisition phase.
[[File:Multidie-no-reference.jpg|300px]]
===Calibration Kit===
The Calibration Kit is a planar surface with a pattern of circles, placed on a bended support.<br/>
Every calibration kit is measured and analized with high-precision machines.<br/>
The measurement is then saved on a xml file and every kit has it's own xml description file. <br/>
The kit is used to recalibrate the optical head of the scanner.
;It's really important to handle the kit with care and to avoid touching the planar surface. Every modification of the planar surface, like scratches or dirt, can make the calibration system unreliable.
[[File:master.jpg|300px]]
==Reference Rim==
The Reference Rim offers reference points to grant accurate dimensional results during the scanning process. Allthough dimensional accuracy is granted for the vast majority of all objects, in case of scanning small metalic objects, such as metal abutments, or other difficult materials, the Reference Rim offers even better results and safety.
[[File:reference rim.png|300px]]
==Articulator Plate==
The Articulator plate allows to scan any kind of articulator in the NeWay scanner, thanks to its ample diameter.
[[File: piattello-articolatore.jpg|300px]]
==Dynamic Articulation Module==
In order to use the dynamic articulation module, some special supports are needed: a specific '''Axis Calibration Object''' and a special '''Mounting Plate''' for every supported articulator.
===Mounting Plates===
Up to the present, our dynamic articulation module supports 6 different mounting plates.
* Artex : [[File:basetta_artex.jpg|300px]]
* Kavo : [[File:basetta_protar.jpg|300px]]
* Adesso : [[File:basetta_adesso.jpg|300px]]
* Sam : [[File:basetta_sam.jpg|300px]]
* Bioart : [[File:basetta_a7.png|300px]]
* Denar : [[File:basetta_denar.jpg|300px]]
===Axis Calibration Object===
This is a specific object, which fits on every mounting plate, used to calibrate the movement system for the Dynamic Articulation Module.
;It's important to keep the object clean and handle it with care. Every modification of the object surface, like scratches or dirt, can make the calibration system unreliable.
[[File:oggetto-test.png|300px|]]
===Concept Quad Support===
The Concept Quad Support is provided together with the additional Concept Quad Scanning Module and it allows to place two antagonist quadrant models and their stumps in the scanner to be scanned in together at the same time.
;It's important to keep the model holder clean and black to reduce the possible interferences between the model holder and the object during the acquisition phase.
[[File:concept-quad.jpg|300px]]
===Accessories Tray===
All these accessories can be kept and organised in Open Technologies Accesories' tray.
[[File:vassoio-porta-accessori.png]]
{{Navigation|Pc_Connection|Implant_Library}}