Changes

As no information has been provided, in this project there are no fixed steps, the user can scan any object in any order. <br /> In this demo project, an upper jaw , and two dies have been scanned, aligned and meshed.

'''It is not necessary to follow the order of operations of this demo; still , it is suggested to align the items before meshing them'''

Also in the Expert project, the steps are divided in into different moments, by clicking the next button {{Inline button|nextAction.png}} the edit mode activates.<br /> Edit or trim the model using the available tools and click next. For detailed information on all the available options in this step visit the [[Edit|Edit Tools]] page.

In the Expert project , it is not possible to use the multidiemulti-die, since the software doesn't know which items will be scanned. Therefore the dies can be scanned in any possible way and combination. In our demo project , we have two dies, and we'll proceed scanning to scan them both on the model holder.<br />To start the scan, the profile needs to be selected:

Two dies have been scanned together and are therefore saved in the same image. To be able to use them in a design project it is needed to separate the two items and create two different images. <br /> To do so, right -click on the '''Stump''' image in the items' list and click '''Clone Item Action'''.

Since this project doensdoesn't have a structure, the software cannot start the alignment automatically. The user needs to select the items to align and their reference.