Changes

The options are divided in two pages: '''General options''' and '''CAD Options'''. The toolbar on the bottom part of the window allows to navigate navigating the options page.

;{{List button|cancel.png}} Exit : Exits the Option Options section.

;{{List button|cadSystemsOpAction.png}} CAD System Options : Opens the options area dedicated to the connection of a CAD System to the scanning software.;{{List button|Ok.png}} Accept : Accepts the changes and closes the option options section.

This options section provides minimum information on the scanner connection, projects , and interface.

This section allows to configure configuring the connection to the scanner in use. ScanWay is infact in fact configured to work with many scanners, however , only one scanner at a time can be active. The current active scanner is shown in the Configuration box. The Configuration box provides information on the location of the configuration file, on the scanner's serial number and on the internal components on the connected machine.

; Load from file : opens an a '''Open File Dialog''' to find and load a configuration file from the disk.

The last available option in this section regards the projector's behaviourbehavior:

; Numeration Type: allows to choose choosing whether to use the FDI numeration or the Universal Tooth Numbering system, most commonly used in the United States.; Language: allows to choose choosing the language for the software. After selecting a new language the software needs to be restarted for the change to take effect.

This option panel allows to configure configuring the software to work with the CAD system of choice. Open Technologies Resellers can configure the scanner to export in many ways, for the final user , however, only the Exocad options are available.