プロジェクト情報、設計する修復の種類、その他のパラメーターを入力します。この種類のプロジェクトでは、'''Scan Mode'''(スキャンモード)が'''Two stone models in occlusion'''(咬合する2つの石膏模型)に設定されていることを確認して下さい。モデルのタイプは後で指定され、それにより正しいウィザードが起動します。(咬合する2つの石膏模型)に設定されていることを確認して下さい。モデルタイプは後で指定され、そこで正しいウィザードを開始します。
Click {{Inline button|nextAction.png}} to access the edit step.をクリックして、編集ステップに進みます。
===Edit編集===
In this case, the image has been trimmed using the base cut tool and clicking on the apply button. このケースでは、ベースカットツールを使ってから適用ボタンをクリックして画像をトリミングしています。
'''BE CAREFUL NOT TO TRIM TOO MUCH, AS TO DO SO THE SOFTWARE MIGHT HAVE ISSUES DURING THE AUTOMATIC ALIGNMENTトリミングしすぎないよう注意して下さい。トリミングしすぎると、自動アライメント処理中にエラーが発生する場合があります'''
[[File:edit-quad.gif]]
Click {{Inline button|nextAction.png}} to access the alignment phase.をクリックして、アライメントに進みます。
===Alignmentアラインメント===
As for all scanned items, the software tries to align all the images to their reference. In this case the reference for all the scanned items is the articulator scan.<div class="mw-translate-fuzzy">スキャンされるその他のアイテムと同様に、ソフトウェアでは、すべての画像をそれぞれのリファレンスにアライメントしようと試みます。このケースでは、スキャンされたすべてのアイテムのリファレンスは咬合器スキャンとなります。</div>
[[File:align-quadrant.gif]]
At the end of the alignment the results are shown. To learn more on the automatic alignment and the manual procedure visit our <div class="mw-translate-fuzzy">アライメントの最後に結果が表示されます。自動アライメントおよび手動による手順については、[[Align|Alignment Interfaceアライメントインターフェース]] page.のページを参照して下さい。</div>
Click {{Inline button|nextAction.png}} to access the last step of the wizard.をクリックして、ウィザードの最後のステップに進みます。
==Step 3ステップ3: Mesh Generation and Exportメッシュ生成およびエクスポート==
At this point the software immediately starts mesh generation. The meshes can be edited and exported individually or as a unique image. To learn more about mesh editing visit our <div class="mw-translate-fuzzy">この時点で、ソフトウェアは自動的にメッシュ生成を開始します。メッシュは編集したり、個別にエクスポートしたり、画像としてエクスポートしたりできます。メッシュの編集について詳しくは、[[Mesh|Mesh Toolsメッシュツール]] page.のページを参照して下さい。</div>
Click on the Export Button エクスポートボタン {{Inline button|exportToCadAction.png}} to export to CAD.をクリックして、CADにエクスポートします。
{{Screenshot|mesh-quadrant.png}}
If the project has been started from Exocad, the CAD will automatically open and the design can be started immediately. Otherwise the software will ask the user how to export the file.<div class="mw-translate-fuzzy">プロジェクトをExocadから開始した場合、CADが自動的に開き、すぐに設計を始めることができます。それ以外の場合は、ファイルをエクスポートする方法を選択するよう求められます。</div>