The first window on the left ''Teeth'' allows to select the items that will be scanned, their options and accesory scans.
{{Screenshot|teeth.png}}
By clicking on a element, the tooth definition panel opens.
;{{List button|none.png}} None : Doesn't mark the tooth as part of the project and closes the tooth definition panel to go back to the previous step.
;{{List button|healthy.png}} Healty : Marks the tooth as healty element. This tooth is part of the main stone model, it can be acquired with the rest of the model.;{{List button|Die.png}} Die : Marks the tooth as a prepared die.This tooth is a removable die that has to be acquired alone or on the Multi-Die support
;{{List button|Implant.png}} Implant : Signals that in the established position there is an implant, and a marker will be scanned.
;{{List button|Antagonist.png}} Antagonist : Marks that the selected tooth is part of the opposing jaw.
;{{List button|Pontic.png}} Pontic : Marks the tooth as pontic element of a bridge.
If an elements is marked as '''Die''', '''Implant''' or '''Pontic''', further options are made available:
[[File:opzionidente.png]]
;{{List button|waxupIcon.png}} Waxup : Indicates that on the selected tooth there is a Waxup element to be scanned.
;{{List button|situIcon.png}} Situ : Indicates that for the selected tooth it there is a situ or pre operative model that has to be scanned.
;{{List button|gingivaIcon.png}} Gingiva : Indicates that the selected element also has a gingiva item that will be scanned separatedly.
Once the tooth cathegory has been defined, and the options selected, accept with '''Ok''' or discanrd the changes with '''Cancel'''.
By holding {{Inline button|Key_ctrl.png}} when clicking on a tooth, the last defined element type will be copied to the selected tooth.
By holding {{Inline button|Key_shift.png}} when clicking on a tooth, the last set parameters will be copied to all the teeth between the last tooth and the selected one.
==Project==
In all projects, the user has to define some '''General Information''':{{Screenshot|prj-section.png}}
<!--TThe Project section allows the user to input some '''General Information''':18-->* The patient ID (Mandatory)* The doctor ID (Optional)* A specific project Patient's name to save the project on the disk, if none is provided one will be automatically generated based on the patient ID* A designer Doctor's name (Optional)
* Notes (Optional)
* A check box to decide wether or not to use the Reference Rim.
It is possible to write freely in the Doctor and Notes boxes. As for the Patient, it is possible to:
*write freely in the box
*Create a new profile clicking on the ''Search/Create'' button
*Search the database for an already existing profile clicking on the ''Search/Create'' button
The '''Search/Create Button''' opens the following window:
[[File:search.png]]
This window allows to search the project database for already existing patients. A filter can be applied and, for those who use VDDS protocols, the research can be restricted to that specific database.
By clicking on the ''Create'' button, the following window opens:
[[File.create_patient.png]]
The patient creation panel allows to input general information rrgarding the patient and the treatment, such as:
<!--T:5-->*The patient's nameWhen the project is defined, confirm it by clicking on the green icon at the bottom of the dialog. *The software will create a specific patient's birth date*The patient's Sex*The doctor'Structured Projects name*The patient''' and start the [[Wiz_Introduction|Step-By-Step Wizard]].s insurance ID, where applies*Some notes
== Fixed Prosthesis Project == <!--T:6-->Once all the information has been filled in, select '''Ok''' to accept the data or '''Cancel''' to discard the changes and go back to the project definition page.
<!--T:19-->Project Definition enabled by clicking on the Prosthesis icon.==Model Types==
<!--T:20-->{{Screenshot|ProtesiThis section allows to choose the kind of model that will be scanned.JPG}}
<!--T:21-->The prosthesis section is the most complex because of the amount of elements that can be set and which require a tooth by tooth definition{{Screenshot|model_section. png}}
<!--TBy clicking on the model image, a model selection panel opens. [[File:model_type.png]] The available choices are: ; {{List button|unsectionedModel.png}} Unsectioned Model : enable this option if the model to be scanned is not sectioned, the scanner will not require a separate scan for every die ; {{List button|normalModel.png}} Sectioned Model :22-->default workflow, in which every element is acquired separately and all the information gets merged at the endOther than ; {{List button|quadrantModel.png}} Quadrant Model : if the ''Concept Quad Scan Module''General Informationis enabled, it is possible to scan all the parts of a Quadrant Tray in just one step; {{List button|impressionModel.png}} Impression Scan : if the ''Impression Scan Module' section' is enabled in the license, check this project shows 2 additional sectionsoption to scan an impression and not a stone model
=== Project Definition === <!--T:7-->
<!--T:23-->
In the main part of the window, an odontogram is available that allows to define the elements that have to be scanned.
<!--T:24-->
By holding {{Inline button|Key_ctrl.png}} when clicking on a tooth, the last selected item will be copied to the selected tooth.
<!--T:25-->
By holding {{Inline button|Key_shift.png}} when clicking on a tooth, the last set parameters will be copied to all the teeth between the last tooth and the selected one.
=== Tooth Information === <!--T:8-->
<!--T:26-->
The section in the bottom right corner allows to select the ''Tooth Type'' and some ''Other Options'' for each selected element.
The Tooth Types are:
<!--T:27-->
; None : this tooth is not part of the project, it will not be acquired or can be ignored
; Healthy : this tooth is part of the main stone model, it can be acquired with the rest of the model
; Stump : this tooth is a removable die that has to be acquired alone or on the Multi-Die support
; Pontic : missing tooth in between two stumps, it will be the intermediate element of a bridge
; Implant : there is an implant in this position, therefore a Scan Body will be acquired
; Bite : this tooth is part of an occlusal bite
<!--T:28-->
Every tooth type has a specific color in the project definition scheme.
<!--T:29-->
The Other Options are:
<!--T:30-->
; Gingiva : this element is mounted on an artificial gingiva that has to be acquired separately from the stone model
; Pre-Op: the anatomy of this element is part of an additional model that will be acquired separately and then aligned to the reference stone model
; Waxup : over this tooth position, it's possible to scan a Pre-Modelled Waxup that will be aligned to the rest of the stone model
=== Additional Parameters === <!--T:9-->
==== Model Type Box ==== <!--T:44-->
Select which specific workflow to use:
; Sectioned Model : default workflow, in which every element is acquired separately and all the information gets merged at the end
; Impression Scan : if the ''Impression Scan Module'' is enabled in the license, check this option to scan an impression and not a stone model
; Quadrant Model : if the ''Concept Quad Scan Module'' is enabled, it is possible to scan all the parts of a Quadrant Tray in just one step
; Unsectioned Model : enable this option if the model to be scanned is not sectioned, the scanner will not require a separate scan for every die
<!--T:10-->