ExamplesFree/pt-br

Nesta página será explicado como escanear um projeto no modo Expert. Esse tipo de projeto não possui um assistente, portanto, a única informação necessária para criar o projeto é a seção de informações gerais.

Como nenhuma informação foi fornecida, neste projeto não há etapas fixas, o usuário pode escanear qualquer objeto em qualquer ordem.
Neste projeto de demonstração, uma arcada superior e dois munhões foram escaneados, alinhados e meshados.

'Não é necessário seguir a ordem das operações desta demo; mas é sugerido alinhar os itens antes de fazer a mesh "

Arcada Superior

Para começar a escanear, clique no 'Botão Escanear' x25px. Uma vez que não há indicações sobre o objeto a ser escaneado, o software solicitará ao usuário selecionar um perfil de escaneamento e, se necessário, algumas opções avançadas. Para saber mais sobre os parâmetros avançados, vá para a página Escanear Interface '-parágrafo Parâmetros Avançados' .

Aqui está a nossa definição de escaneamento:

Once the profile has been selected the upper model scan can be started.
Place the model on the model holder and click the Scan Button. Once the scan is finished the result will be shown.

Also in the Expert project, the steps are divided in different moments, by clicking the next button the edit mode activates.
Edit or trim the model using the available tools and click next. For detailed information on all the available options in this step visit the Edit Tools page.

To start another scan, click on the Scan button.

Dies

In the Expert project it is not possible to use the multidie, since the software doesn't know which items will be scanned. Therefore the dies can be scanned in any possible way and combination. In our demo project we have two dies, and we'll proceed scanning them both on the model holder.
To start the scan, the profile needs to be selected:

At this point, the scan can be started. Place the dies on the chosen support and click the Scan Button. Once the scan is finished the result will be shown.

As for the previous item, by clicking the edit mode activates.

Two dies have been scanned together and are therefore saved in the same image. To be able to use them in a design project it is needed to separate the two items and create two different images.
To do so, right click on the Stump image in the items' list and click Clone Item Action.

Now edit and rename the two images, leaving only one element per image.

When all the items are in separate images, they can be aligned to their reference.

Alignment

Since this project doens't have a structure, the software cannot start the alignment automatically. The user needs to select the items to align and their reference.

All the items are now in position and the user can start editing the images for mesh generation.

Reference Editing

The reference editing is very important because it avoids exporting double surfaces to the CAD and consequential errors during design.
In Structured projects this step is completely automatic.

To delete double surfaces, click on the reference image (in this case the upper model) in the items' list and edit out the parts that were scanned separately.

Once all reference images have been edited the mesh can be generated.

Mesh Generation

As for the scans, different items get meshed in different ways. The user has to select a meshing profile for each item.

To then Export the generated meshes, right click on the meshed elements in the items' list and select Export Items. The software will ask the user to select the folder for the export.