Pc Min Requirements

Recommended Systems

The Computers connected to our scanners have to meet specific requirements.

In order to simplify the choice, we recommend two reference systems:

1. Dell XPS (with Intel i7) for Deluxe Scanners
2. Asus G11CB (with Intel i7) for Deluxe Scanners

Minimum Requirements

Software

These are the minimum requirements our software needs:

Component	Requirement
Operating System	Windows 7/8/8.1/10 (64 bit)
CPU	Intel® Quad Core ™ or Better
RAM	8Gb RAM or Better
Minimun required Video Card	NVIDIA GeForce GTX 560 Ti or Better * NVIDIA GeForce GTX 660 or Better * NVIDIA GeForce GTX 745 or Better *
Suggested Video Card	NVIDIA GeForce GTX 950 or Better * NVIDIA GeForce GTX 1050 or Better *

The Video Card has important additional requirements:

• Only NVIDIA GeForce cards are supported by the system
• The NVIDIA QUADRO line is not supported
• The name scheme for the NVIDIA cards is complex, as specified in this page. To check if a card is better than another, check the 'Core Config' column of the table. A card with less than 300:40:30 cores is not supported. Particular attention has to be given to the appendix of the card name. E.g. the GTX 560 Ti is good enough but the GTX 560M is not.

Scanner Connection

In order to work properly, the scanner needs to be correctly connected to the PC. Make sure to check here-below the necessary connections for your scanning system.

NeWay scanning system can be connected to a Computer through only 2 cables:

• 1 USB 3.0 Port that has to be directly connected to the Computer's motherboard. Only Intel C220 or Better and Rensas USB 3.0 are supported. Other USB chipsets could not properly work.
• 1 HDMI Port