translator
3,666
edits
Changes
Jump to navigation
Jump to search
Created page with "Editar"
{{DISPLAYTITLE:Edit Tools|noerror}}
=Structure=
After each scanning step, apart for the articulator, the wizard interface presents the '''Image Edit step'''. For this step, the lower toolbar adapts offering a selection of tools and actions.
{{Screenshot|wizard-edit-scan.png}}
Another edit step is the identification of markers and dies (when scanned using the custom setup and not the multidie).
==Edit Toolbar==
;{{List button|prevAction.png}} Previous: Goes back to the previous step. Icon not active during the first scanning step.
;{{List button|rectSelTool.png}} Selection Tools: Opens the selection tool panel in which it is possible to choose how to select part of the image. The available tools will be described later in this page.
;{{List button|selOpAction.png}} Select Action: Opens the actions panel in which it is possible to choose what to do with the selected part of the image. The available actions will be described later in this page.
;{{List button|cutBaseAction.png}} Cut base: Cuts the base of the object with a straight plan. This tool will be described in detail later in this page.
;{{List button|nextAction.png}} Next: Goes one step forward in the project. This icon is available when the ongoing step is complete or in steps that can be skipped.
===Selection Tools===
{{Animation|selection-tools.gif}}
As shown in the GIF, these tools allow to select part of the image to edit the object. Four selection tools are available:
;{{List button|rectSelTool.png}} Rectangular Selection: Draws a rectangle that starts from the click point and grows following the mouse; to select, release the left mouse button.
;{{List button|elliSelTool.png}} Elliptical Selection: Draws an ellipse centered in the click point that grows following the mouse; to select, release the left mouse button.
;{{List button|lineSelTool.png}} Free Closed Line Selection: Click and hold the left mouse button to start drawing a line that follows the mouse. Release the left mouse button to close the line and select all the area inside its borders.
;{{List button|polygonSelTool.png}} Polygonal Selection: Click in two different points to draw a line and a third point to create a polygon. Double click to close the polygon and select all the area inside its borders
===Actions===
{{Animation|edit-actions.gif}}
These actions allow to modify the selected information. The following actions are available:
;{{List button|cutSelAction.png}} Delete Selection (DEL) : Deletes the currently selected data.
;{{List button|cropSelAction.png}} Crop Selection ({{Inline button|Key_ctrl.png}} + K) : Keeps only the selected data and removes all the rest.
;{{List button|invertSelAction.png}} Invert Selection ({{Inline button|Key_ctrl.png}} + I) : Selects all the data that is not selected and deselects the selected data.
;{{List button|clearSelAction.png}} Clear Selection ({{Inline button|Key_ctrl.png}} + C) : Deselects all the data.
===Cut Base===
To use the '''Base Cut''' tool, click on the {{Inline button|cutBaseAction.png}} button then, either click on the model or drag the cursor to determine the height of the cut. Click '''Apply''' to accept the changes. Here below an explanatory video.
{{Animation|cut-base.gif}}
==Dies identification==
When scanning dies using the custom setup, as shown in the [[Scan|Scan Interface]] page, the dies need to be identified.
{{Screenshot|segment-interface-dies.png}}
The interface shows a specific main toolbar, a teeth graphic on the right showing the elements that need to be identified. Before the identification the dies are marked in yellow, the item marked with the red border is the one that needs to be identified and separated from the others. The wizard will underline all the items in an established sequence, the user can select manually the item to be identified by left clicking on its number in the teeth graph.
The main toolbar offers these tools:
;{{List button|prevAction.png}} Previous: Goes back to the previous step. Icon not active during the first scanning step.
;{{List button|rectSelTool.png}} Selection Tools: Opens the selection tool panel in which it is possible to choose how to select part of the image. The available tools will be described later in this page.
;{{List button|segmentateAction.png}} Extraction: Extracts the image of the selected die from the general scan, thus identifying and separating it from the others.
;{{List button|selOpAction.png}} Select Action: Opens the actions panel in which it is possible to choose what to do with the selected part of the image. The available actions will be described later in this page.
;{{List button|nextAction.png}} Next: Goes forward one step in the project. This option is not available untill all the items have been identified and separated.
{{Animation|segment_d.gif}}
Once the items have been identified and separated, they are marked in green in the graph. In case an error occurs during identification and two or more stumps get mixed up, it is possible to restart the identification by clicking on one of the {{Inline button|undoSegmentationAction.png}} icon.
{{Screenshot|segment_dies_restart.png}}
===Marker identification===
When scanning implant cases, the user needs to use markers as reference for the position of the implant. Once scanned, each marker needs to be identified and separated from the others.
{{Screenshot|segment_markers.png}}
The interface shows a specific main toolbar, a teeth graphic on the right showing the elements that need to be identified. Before the identification the teeth are marked in yellow, the item marked with the red boder is the one that needs to be identified and separated from the others. The wizard will underline all the items in an established sequence, the user can select manually the item to be identified by left clicking on its number in the teeth graph.
The main toolbar offers these tools:
;{{List button|prevAction.png}} Previous: Goes back to the previous step. Icon not active during the first scanning step.
;{{List button|rectSelTool.png}} Selection Tools: Opens the selection tool panel in which it is possible to choose how to select part of the image. The available tools will be described later in this page.
;{{List button|segmentateImplantAction.png}} Extraction: Extracts the image of the selected die from the general scan, thus identifying and separating it from the others.
;{{List button|selOpAction.png}} Select Action: Opens the actions panel in which it is possible to choose what to do with the selected part of the image. The available actions will be described later in this page.
;{{List button|nextAction.png}} Next: Goes forward one step in the project. This option is not available untill all the items have been identified an separated.
{{Animation|segment_markers.gif}}
Once the items have been identified and separated, they are marked in green in the graph. In case an error occurs during identification and two or more markers get mixed up, it is possible to restart the identification by clicking on one of the {{Inline button|undoSegmentationAction.png}} icon.
{{Navigation|Scan|Align}}
=Structure=
After each scanning step, apart for the articulator, the wizard interface presents the '''Image Edit step'''. For this step, the lower toolbar adapts offering a selection of tools and actions.
{{Screenshot|wizard-edit-scan.png}}
Another edit step is the identification of markers and dies (when scanned using the custom setup and not the multidie).
==Edit Toolbar==
;{{List button|prevAction.png}} Previous: Goes back to the previous step. Icon not active during the first scanning step.
;{{List button|rectSelTool.png}} Selection Tools: Opens the selection tool panel in which it is possible to choose how to select part of the image. The available tools will be described later in this page.
;{{List button|selOpAction.png}} Select Action: Opens the actions panel in which it is possible to choose what to do with the selected part of the image. The available actions will be described later in this page.
;{{List button|cutBaseAction.png}} Cut base: Cuts the base of the object with a straight plan. This tool will be described in detail later in this page.
;{{List button|nextAction.png}} Next: Goes one step forward in the project. This icon is available when the ongoing step is complete or in steps that can be skipped.
===Selection Tools===
{{Animation|selection-tools.gif}}
As shown in the GIF, these tools allow to select part of the image to edit the object. Four selection tools are available:
;{{List button|rectSelTool.png}} Rectangular Selection: Draws a rectangle that starts from the click point and grows following the mouse; to select, release the left mouse button.
;{{List button|elliSelTool.png}} Elliptical Selection: Draws an ellipse centered in the click point that grows following the mouse; to select, release the left mouse button.
;{{List button|lineSelTool.png}} Free Closed Line Selection: Click and hold the left mouse button to start drawing a line that follows the mouse. Release the left mouse button to close the line and select all the area inside its borders.
;{{List button|polygonSelTool.png}} Polygonal Selection: Click in two different points to draw a line and a third point to create a polygon. Double click to close the polygon and select all the area inside its borders
===Actions===
{{Animation|edit-actions.gif}}
These actions allow to modify the selected information. The following actions are available:
;{{List button|cutSelAction.png}} Delete Selection (DEL) : Deletes the currently selected data.
;{{List button|cropSelAction.png}} Crop Selection ({{Inline button|Key_ctrl.png}} + K) : Keeps only the selected data and removes all the rest.
;{{List button|invertSelAction.png}} Invert Selection ({{Inline button|Key_ctrl.png}} + I) : Selects all the data that is not selected and deselects the selected data.
;{{List button|clearSelAction.png}} Clear Selection ({{Inline button|Key_ctrl.png}} + C) : Deselects all the data.
===Cut Base===
To use the '''Base Cut''' tool, click on the {{Inline button|cutBaseAction.png}} button then, either click on the model or drag the cursor to determine the height of the cut. Click '''Apply''' to accept the changes. Here below an explanatory video.
{{Animation|cut-base.gif}}
==Dies identification==
When scanning dies using the custom setup, as shown in the [[Scan|Scan Interface]] page, the dies need to be identified.
{{Screenshot|segment-interface-dies.png}}
The interface shows a specific main toolbar, a teeth graphic on the right showing the elements that need to be identified. Before the identification the dies are marked in yellow, the item marked with the red border is the one that needs to be identified and separated from the others. The wizard will underline all the items in an established sequence, the user can select manually the item to be identified by left clicking on its number in the teeth graph.
The main toolbar offers these tools:
;{{List button|prevAction.png}} Previous: Goes back to the previous step. Icon not active during the first scanning step.
;{{List button|rectSelTool.png}} Selection Tools: Opens the selection tool panel in which it is possible to choose how to select part of the image. The available tools will be described later in this page.
;{{List button|segmentateAction.png}} Extraction: Extracts the image of the selected die from the general scan, thus identifying and separating it from the others.
;{{List button|selOpAction.png}} Select Action: Opens the actions panel in which it is possible to choose what to do with the selected part of the image. The available actions will be described later in this page.
;{{List button|nextAction.png}} Next: Goes forward one step in the project. This option is not available untill all the items have been identified and separated.
{{Animation|segment_d.gif}}
Once the items have been identified and separated, they are marked in green in the graph. In case an error occurs during identification and two or more stumps get mixed up, it is possible to restart the identification by clicking on one of the {{Inline button|undoSegmentationAction.png}} icon.
{{Screenshot|segment_dies_restart.png}}
===Marker identification===
When scanning implant cases, the user needs to use markers as reference for the position of the implant. Once scanned, each marker needs to be identified and separated from the others.
{{Screenshot|segment_markers.png}}
The interface shows a specific main toolbar, a teeth graphic on the right showing the elements that need to be identified. Before the identification the teeth are marked in yellow, the item marked with the red boder is the one that needs to be identified and separated from the others. The wizard will underline all the items in an established sequence, the user can select manually the item to be identified by left clicking on its number in the teeth graph.
The main toolbar offers these tools:
;{{List button|prevAction.png}} Previous: Goes back to the previous step. Icon not active during the first scanning step.
;{{List button|rectSelTool.png}} Selection Tools: Opens the selection tool panel in which it is possible to choose how to select part of the image. The available tools will be described later in this page.
;{{List button|segmentateImplantAction.png}} Extraction: Extracts the image of the selected die from the general scan, thus identifying and separating it from the others.
;{{List button|selOpAction.png}} Select Action: Opens the actions panel in which it is possible to choose what to do with the selected part of the image. The available actions will be described later in this page.
;{{List button|nextAction.png}} Next: Goes forward one step in the project. This option is not available untill all the items have been identified an separated.
{{Animation|segment_markers.gif}}
Once the items have been identified and separated, they are marked in green in the graph. In case an error occurs during identification and two or more markers get mixed up, it is possible to restart the identification by clicking on one of the {{Inline button|undoSegmentationAction.png}} icon.
{{Navigation|Scan|Align}}
