Prosthesis Project

La prima icona nella pagina Creazione Progetto apre la definizione del Progetto per Protesi.

La finestra per la definizione del progetto si divide in 5 sezioni.

Definizione dei Denti

La prima finestra a sinistra "Denti" permette di selezionare gli elementi che saranno acquisiti, le loro opzioni e gli accessori per la scansione.

Facendo click su di un elemento, si apre il pannello per la definizione dei denti.

Le scelte possibili sono:

Nessuno: Non seleziona il dente come parte del progetto e chiude il pannello per la definizione dei denti, tornando al passo precedente.
Sano: Seleziona il dente come elemento sano. Se questo dente è parte di un modello, può essere acquisito con il resto del modello. Se usato su un'arcata antagonista completamente sana, imposta il progetto per scansionare un modello antagonista.
Moncone: Seleziona il dente come moncone preparato. Questo dente è un moncone rimovibile che può essere acquisito da solo o su un supporto multi-die.
Impianto: Segnala che nella posizione stabilita c'è un impianto, e sarà scansionato un marker.
Bite Antagonista: Seleziona che il dente selezionato è parte di un bite in silicone. Per impostare un modello come antagonista, utilizzare Sano.
Intermedio: Seleziona il dente come elemento intermedio di un ponte.

Se un elemento è selezionato come Moncone, Impianto o Intermedio, diventano disponibili ulteriori opzioni:

Waxup: Indicates that on the selected tooth there is a Waxup element to be scanned.
Situ: Indicates that for the selected tooth it there is a situ or pre operative model that has to be scanned.
Gingiva: Indicates that the selected element also has a gingiva item that will be scanned separatedly.

Once the tooth cathegory has been defined, and the options selected, accept with Ok or discanrd the changes with Cancel.

By holding when clicking on a tooth, the last defined element type will be copied to the selected tooth.

By holding when clicking on a tooth, the last set parameters will be copied to all the teeth between the last tooth and the selected one.

Project

The Project section allows the user to input some General Information:

Patient's name
Doctor's name (Optional)
Notes (Optional)
A check box to decide wether or not to use the Reference Rim.

It is possible to write freely in the Doctor and Notes boxes. As for the Patient, it is possible to:

write freely in the box
Create a new profile clicking on the Search/Create button
Search the database for an already existing profile clicking on the Search/Create button

The Search/Create Button opens the following window:

This window allows to search the project database for already existing patients. A filter can be applied and, for those who use VDDS protocols, the research can be restricted to that specific database.

By clicking on the Create button, the following window opens:

The patient creation panel allows to input general information rrgarding the patient and the treatment, such as:

The patient's name
The patient's birth date
The patient's Sex
The doctor's name
The patient's insurance ID, where applies
Some notes

Once all the information has been filled in, select Ok to accept the data or Cancel to discard the changes and go back to the project definition page.

Model Types

This section allows to choose the kind of model that will be scanned.

By clicking on the model image, a model selection panel opens.

The available choices are:

Unsectioned Model: enable this option if the model to be scanned is not sectioned, the scanner will not require a separate scan for every die
Sectioned Model: default workflow, in which every element is acquired separately and all the information gets merged at the end
Quadrant Model: if the Concept Quad Scan Module is enabled, it is possible to scan all the parts of a Quadrant Tray in just one step
Impression Scan: if the Impression Scan Module is enabled in the license, check this option to scan an impression and not a stone model

Cad Integration

When the project is started directly from Exocad, the STL files produced in the scanning process will be transmitted to Exocad in just one click. On the other end, if the project gets created in the scanning software, the automatic export to CAD will not be configured, unless it is selected in this section.

By by clicking on the No Cad box the CAD selection window opens.

and it allows to choose one of the software integrated with our scanning system for automatic trasmission of the STL information.

Exocad
VDDS protocol (for orthodontics)
Onyx Ceph (for orthodontics)

If No Cad is selected, the software will then ask the user to define an export path for the STL files.

Articulators

The last section allows to select an articolator to use the Dynamic Articulation Module.

If the Dynamic Articulation module is not active on the license this section will not be available

Remember that it is always possible to scan any kind of articulator, this section is only to be used if you want to scan with the dynamic articulation module and pass the occlusion position in the Virtual Articulator of Exocad.

The Articulators available in Exocad and therefore in our software are:

Artex: to scan the Artex Articulator and to use the same in Exocad's Virtual Articulator
Sam/ Adesso: to scan the Sam Articulator or the Adesso splitcast and to use the same in Exocad's Virtual Articulator
Protar- Kavo: to scan the Kavo Articulator and to use the same in Exocad's Virtual Articulator
A7 - Bioart: to scan the Bioart Articulator and to use the same in Exocad's Virtual Articulator
Denar by Whipmix: to scan the Denar Articulator and to use the same in Exocad's Virtual Articulator

To start the project accept the definition with the button.