Difference between revisions of "NewPrjPro"

From Dental Wiki
Jump to navigation Jump to search
(Created page with "{{DISPLAYTITLE:Prosthesis Project|noerror}} <translate> The first icon in the Project Creation page opens the Prosthesis Project definition. {{Screenshot|Pro-pro...")
 
Line 11: Line 11:
  
 
The first window on the left ''Teeth'' allows to select the items that will be scanned, their options and accesory scans.
 
The first window on the left ''Teeth'' allows to select the items that will be scanned, their options and accesory scans.
 +
 +
{{Screenshot|teeth.png}}
  
 
By clicking on a element, the tooth definition panel opens.
 
By clicking on a element, the tooth definition panel opens.
Line 19: Line 21:
  
 
;{{List button|none.png}}                None            : Doesn't mark the tooth as part of the project and closes the tooth definition panel to go back to the previous step.
 
;{{List button|none.png}}                None            : Doesn't mark the tooth as part of the project and closes the tooth definition panel to go back to the previous step.
−
;{{List button|healthy.png}}            Healty            : Marks the tooth as healty element.
+
;{{List button|healthy.png}}            Healty            : Marks the tooth as healty element. This tooth is part of the main stone model, it can be acquired with the rest of the model.
−
;{{List button|Die.png}}                Die            : Marks the tooth as a prepared die.
+
;{{List button|Die.png}}                Die            : Marks the tooth as a prepared die. This tooth is a removable die that has to be acquired alone or on the Multi-Die support
 
;{{List button|Implant.png}}            Implant            : Signals that in the established position there is an implant, and a marker will be scanned.
 
;{{List button|Implant.png}}            Implant            : Signals that in the established position there is an implant, and a marker will be scanned.
 
;{{List button|Antagonist.png}}          Antagonist            : Marks that the selected tooth is part of the opposing jaw.  
 
;{{List button|Antagonist.png}}          Antagonist            : Marks that the selected tooth is part of the opposing jaw.  
 
;{{List button|Pontic.png}}              Pontic            : Marks the tooth as pontic element of a bridge.
 
;{{List button|Pontic.png}}              Pontic            : Marks the tooth as pontic element of a bridge.
  
 +
If an elements is marked as '''Die''', '''Implant''' or '''Pontic''', further options are made available:
 +
 +
[[File:opzionidente.png]]
 +
 +
;{{List button|waxupIcon.png}}            Waxup              : Indicates that on the selected tooth there is a Waxup element to be scanned.
 +
;{{List button|situIcon.png}}            Situ              : Indicates that for the selected tooth it there is a situ or pre operative model that has to be scanned.
 +
;{{List button|gingivaIcon.png}}          Gingiva            : Indicates that the selected element also has a gingiva item that will be scanned separatedly.
 +
 +
Once the tooth cathegory has been defined, and the options selected, accept with '''Ok''' or discanrd the changes with '''Cancel'''.
 +
 +
 +
By holding {{Inline button|Key_ctrl.png}} when clicking on a tooth, the last defined element type will be copied to the selected tooth.
  
 +
By holding {{Inline button|Key_shift.png}} when clicking on a tooth, the last set parameters will be copied to all the teeth between the last tooth and the selected one.
  
 +
==Project==
  
−
In all projects, the user has to define some '''General Information''':
+
{{Screenshot|prj-section.png}}
  
−
<!--T:18-->
+
The Project section allows the user to input some '''General Information''':
−
* The patient ID (Mandatory)
+
 
−
* The doctor ID (Optional)
+
* Patient's name
−
* A specific project name to save the project on the disk, if none is provided one will be automatically generated based on the patient ID
+
* Doctor's name (Optional)
−
* A designer name (Optional)
 
 
* Notes (Optional)
 
* Notes (Optional)
 +
* A check box to decide wether or not to use the Reference Rim.
 +
 +
It is possible to write freely in the Doctor and Notes boxes. As for the Patient, it is possible to:
 +
 +
*write freely in the box
 +
*Create a new profile clicking on the ''Search/Create'' button
 +
*Search the database for an already existing profile clicking on the ''Search/Create'' button
 +
 +
The '''Search/Create Button''' opens the following window:
 +
 +
[[File:search.png]]
 +
 +
This window allows to search the project database for already existing patients. A filter can be applied and, for those who use VDDS protocols, the research can be restricted to that specific database.
 +
 +
By clicking on the ''Create'' button, the following window opens:
 +
 +
[[File.create_patient.png]]
 +
 +
The patient creation panel allows to input general information rrgarding the patient and the treatment, such as:
  
−
<!--T:5-->
+
*The patient's name
−
When the project is defined, confirm it by clicking on the green icon at the bottom of the dialog. The software will create a specific '''Structured Project''' and start the [[Wiz_Introduction|Step-By-Step Wizard]].
+
*The patient's birth date
 +
*The patient's Sex
 +
*The doctor's name
 +
*The patient's insurance ID, where applies
 +
*Some notes
  
−
== Fixed Prosthesis Project == <!--T:6-->
+
Once all the information has been filled in, select '''Ok''' to accept the data or '''Cancel''' to discard the changes and go back to the project definition page.
  
−
<!--T:19-->
+
==Model Types==
−
Project Definition enabled by clicking on the Prosthesis icon.
 
  
−
<!--T:20-->
+
This section allows to choose the kind of model that will be scanned.
−
{{Screenshot|Protesi.JPG}}
 
  
−
<!--T:21-->
+
{{Screenshot|model_section.png}}
−
The prosthesis section is the most complex because of the amount of elements that can be set and which require a tooth by tooth definition.  
 
  
−
<!--T:22-->
+
By clicking on the model image, a model selection panel opens.
−
Other than the '''General Information''' section, this project shows 2 additional sections
+
 
 +
[[File:model_type.png]]
 +
 
 +
The available choices are:
 +
 
 +
; {{List button|unsectionedModel.png}}            Unsectioned Model : enable this option if the model to be scanned is not sectioned, the scanner will not require a separate scan for every die
 +
; {{List button|normalModel.png}}                Sectioned Model : default workflow, in which every element is acquired separately and all the information gets merged at the end
 +
; {{List button|quadrantModel.png}}              Quadrant Model : if the ''Concept Quad Scan Module'' is enabled, it is possible to scan all the parts of a Quadrant Tray in just one step
 +
; {{List button|impressionModel.png}}            Impression Scan : if the ''Impression Scan Module'' is enabled in the license, check this option to scan an impression and not a stone model
  
−
=== Project Definition === <!--T:7-->
 
  
−
<!--T:23-->
 
−
In the main part of the window, an odontogram is available that allows to define the elements that have to be scanned.
 
  
−
<!--T:24-->
 
−
By holding {{Inline button|Key_ctrl.png}} when clicking on a tooth, the last selected item will be copied to the selected tooth.
 
  
−
<!--T:25-->
 
−
By holding {{Inline button|Key_shift.png}} when clicking on a tooth, the last set parameters will be copied to all the teeth between the last tooth and the selected one.
 
  
−
=== Tooth Information === <!--T:8-->
 
  
−
<!--T:26-->
 
−
The section in the bottom right corner allows to select the ''Tooth Type'' and some ''Other Options'' for each selected element.
 
−
The Tooth Types are:
 
  
−
<!--T:27-->
 
−
; None : this tooth is not part of the project, it will not be acquired or can be ignored
 
−
; Healthy : this tooth is part of the main stone model, it can be acquired with the rest of the model
 
−
; Stump : this tooth is a removable die that has to be acquired alone or on the Multi-Die support
 
−
; Pontic : missing tooth in between two stumps, it will be the intermediate element of a bridge
 
−
; Implant : there is an implant in this position, therefore a Scan Body will be acquired
 
−
; Bite : this tooth is part of an occlusal bite
 
  
−
<!--T:28-->
 
−
Every tooth type has a specific color in the project definition scheme.
 
  
−
<!--T:29-->
 
−
The Other Options are:
 
  
−
<!--T:30-->
 
−
; Gingiva : this element is mounted on an artificial gingiva that has to be acquired separately from the stone model
 
−
; Pre-Op: the anatomy of this element is part of an additional model that will be acquired separately and then aligned to the reference stone model
 
−
; Waxup : over this tooth position, it's possible to scan a Pre-Modelled Waxup that will be aligned to the rest of the stone model
 
  
 
=== Additional Parameters === <!--T:9-->
 
=== Additional Parameters === <!--T:9-->
Line 106: Line 123:
 
==== Model Type Box ==== <!--T:44-->
 
==== Model Type Box ==== <!--T:44-->
 
Select which specific workflow to use:
 
Select which specific workflow to use:
−
; Sectioned Model : default workflow, in which every element is acquired separately and all the information gets merged at the end
 
−
; Impression Scan : if the ''Impression Scan Module'' is enabled in the license, check this option to scan an impression and not a stone model
 
−
; Quadrant Model : if the ''Concept Quad Scan Module'' is enabled, it is possible to scan all the parts of a Quadrant Tray in just one step
 
−
; Unsectioned Model : enable this option if the model to be scanned is not sectioned, the scanner will not require a separate scan for every die
 
  
 
<!--T:10-->
 
<!--T:10-->

Revision as of 12:07, 12 April 2017


The first icon in the Project Creation page opens the Prosthesis Project definition.

500px

The Project definition window is divided into 5 sections.

Tooth Definition

The first window on the left Teeth allows to select the items that will be scanned, their options and accesory scans.

Teeth.png

By clicking on a element, the tooth definition panel opens.

Tooth selection.png

The possible choices are:

None.png None
Doesn't mark the tooth as part of the project and closes the tooth definition panel to go back to the previous step.
Healthy.png Healty
Marks the tooth as healty element. This tooth is part of the main stone model, it can be acquired with the rest of the model.
Die.png Die
Marks the tooth as a prepared die. This tooth is a removable die that has to be acquired alone or on the Multi-Die support
Implant.png Implant
Signals that in the established position there is an implant, and a marker will be scanned.
Antagonist.png Antagonist
Marks that the selected tooth is part of the opposing jaw.
Pontic.png Pontic
Marks the tooth as pontic element of a bridge.

If an elements is marked as Die, Implant or Pontic, further options are made available:

File:Opzionidente.png

WaxupIcon.png Waxup
Indicates that on the selected tooth there is a Waxup element to be scanned.
SituIcon.png Situ
Indicates that for the selected tooth it there is a situ or pre operative model that has to be scanned.
GingivaIcon.png Gingiva
Indicates that the selected element also has a gingiva item that will be scanned separatedly.

Once the tooth cathegory has been defined, and the options selected, accept with Ok or discanrd the changes with Cancel.


By holding Key ctrl.png when clicking on a tooth, the last defined element type will be copied to the selected tooth.

By holding Key shift.png when clicking on a tooth, the last set parameters will be copied to all the teeth between the last tooth and the selected one.

Project

Prj-section.png

The Project section allows the user to input some General Information:

  • Patient's name
  • Doctor's name (Optional)
  • Notes (Optional)
  • A check box to decide wether or not to use the Reference Rim.

It is possible to write freely in the Doctor and Notes boxes. As for the Patient, it is possible to:

  • write freely in the box
  • Create a new profile clicking on the Search/Create button
  • Search the database for an already existing profile clicking on the Search/Create button

The Search/Create Button opens the following window:

File:Search.png

This window allows to search the project database for already existing patients. A filter can be applied and, for those who use VDDS protocols, the research can be restricted to that specific database.

By clicking on the Create button, the following window opens:

File.create_patient.png

The patient creation panel allows to input general information rrgarding the patient and the treatment, such as:

  • The patient's name
  • The patient's birth date
  • The patient's Sex
  • The doctor's name
  • The patient's insurance ID, where applies
  • Some notes

Once all the information has been filled in, select Ok to accept the data or Cancel to discard the changes and go back to the project definition page.

Model Types

This section allows to choose the kind of model that will be scanned.

Model section.png

By clicking on the model image, a model selection panel opens.

File:Model type.png

The available choices are:

UnsectionedModel.png Unsectioned Model 
enable this option if the model to be scanned is not sectioned, the scanner will not require a separate scan for every die
NormalModel.png Sectioned Model 
default workflow, in which every element is acquired separately and all the information gets merged at the end
QuadrantModel.png Quadrant Model 
if the Concept Quad Scan Module is enabled, it is possible to scan all the parts of a Quadrant Tray in just one step
ImpressionModel.png Impression Scan 
if the Impression Scan Module is enabled in the license, check this option to scan an impression and not a stone model






Additional Parameters

In the general information section, there are some additional parameters:

Articulator Box

Select how the models are kept in articulation:

Matching models 
to scan the occlusion if there is no need to use the automatic positioning in Exocad's Virtual Articulator
Articulator A 
to scan the Artex Articulator and to use the same in Exocad's Virtual Articulator
Articulator S 
to scan the Sam Articulator and to use the same in Exocad's Virtual Articulator
Articulator P 
to scan the Kavo Articulator and to use the same in Exocad's Virtual Articulator
Articulator B 
to scan the Bioart Articulator and to use the same in Exocad's Virtual Articulator
Articulator D 
to scan the Denar Articulator and to use the same in Exocad's Virtual Articulator

Model Type Box

Select which specific workflow to use:

Here below an example of a defined prosthesis project for a 3-elements bridge with a stone antagonist:

500px

Multi-Die Project

Use the Multi-Die Project to scan different dies from different patients in one single project:

500px

To set the case, click on each multi-die position and define the name of each patient in the Patient field.

To scan a Waxup for the selected stump, select the Waxup box.

Orthodontic/Scheletric/Impression Project

The Orthodontic, Scheletric and Impression Projects are straightforward and similar to one another.

500px

These projects require the user to select the whole jaws instead of individual teeth.

When the project definition is confirmed, the software will prepare the Project Tree to acquire the data from the scanner.

Project Editing

If the project definition needs to be changed while already in use, it is possible to select the Edit Project tool in the File Menu or in the Project Toolbar (See Support Toolbars And Menus).

This tool will open again the Project Manager with the current project definition. It is possible to change the project definition and the parameters of every tooth.

When the editing is confirmed, the software will adapt the Project Tree. Editing an already scanned, or partially scanned, project can cause data loss.

Navigation Back.png Homebutton.png Navigation Next.png
Retrieved from "https://dentalwiki.opentechdental.com/w/index.php?title=NewPrjPro&oldid=26025"