Difference between revisions of "ExamplesQuadrant"

From Dental Wiki
Jump to navigation Jump to search
Line 50: Line 50:
 
Once the objects have been placed in the scanner (either the articulator or the models one on top of the other), the scan can be started with the '''Scan Button'''{{Inline button|scanAction.png}}. Once the scan is finished the result will be shown.
 
Once the objects have been placed in the scanner (either the articulator or the models one on top of the other), the scan can be started with the '''Scan Button'''{{Inline button|scanAction.png}}. Once the scan is finished the result will be shown.
  
[[File:quandrant-articulator-steps.png]]
+
[[File:Quadrant-articulator-steps.png]]
  
 
For further information on the other available functions check the [[Scan|Scan Interface]] page.
 
For further information on the other available functions check the [[Scan|Scan Interface]] page.

Revision as of 07:59, 10 May 2017


In this page will be followed and explained the wizard for scanning 2 quadrant models in occlusion with 3 dies using the Open Technologies Quadrant Module.

This module allows to scan quadrant models, with up to 4 stumps, in a 2-steps defined project cutting in half the scanning time.

THIS IS AN ADDITIONAL OPEN TECHNOLOGIES LICENSE MODULE: ASK YOUR DEALER HOW TO GET IT!!"

Project definition starting from Exocad

To create this project in Exocad, click on the DentalDB icon in your desktop. The project manager will open.

Fill in the project information, the kind of restoration that needs to be designed and the extra parameters. For this kind of project make sure that the Scan Mode is set on Two stone models in occlusion, the type of model will be specified later in the scanning software to trigger the correct wizard.

For further information on how to create projects in Exocad, visit the specific page on the Exocad Wiki!

Here is the project definition for our demo project:

Prj-definition-exo-quadrant.gif

Once the project has been defined just click OPT in the Actions section to launch the scanning software.
The first thing the scanning software shows is the project created in Exocad.

In order to activate the correct wizard, click on the Model Type icon and select the QuadrantModel.png option.
Click the Accept button Ok.png to save the changes and start the project.

Model-type-quadrant.gif

Project definition starting from ScanWay

All projects can be defined in the scanning software as well, regardless the CAD that will be later on used to design.

Launch the scanning software double-clicking on the ScanWay icon on your desktop. The Welcome Page will open; to create the project click on the first icon.

NewPrjIcon.png

For detailed information on how to define a project visit the specific page: Create a New Project.

Here is the definition of our demo project:

Prj-definition-quadrant.gif

Both the project definitions described lead to the same wizard, which will be now followed step by step.

Step 1: Articulator Scanning

In this case, for articulator, is ment the quadrant tray occlusor, which can be scanned directly on the normal model holder.
The user can decide freely how to place the occlusor on the model holder, here are our suggestions.

File:Occlusor-positions.png

Once the objects have been placed in the scanner (either the articulator or the models one on top of the other), the scan can be started with the Scan ButtonScanAction.png. Once the scan is finished the result will be shown.

Quadrant-articulator-steps.png

For further information on the other available functions check the Scan Interface page.

Click NextAction.png to access the second step of the wizard.

Step 2: Quadrant Scan

This step develops in the usual phases.

Scan

For this step, all the elements need to be positioned as marked by the software in the Quadrant holder.
Click the Scan ButtonScanAction.png to start the scan. Once the scan is finished the result will be shown.

File:Quandrant-steps.png

Click NextAction.png to access the edit step.

Edit

In this case, the image has been trimmed using the base cut tool and clincing on the apply button.

BE CAREFUL NOT TO TRIM TOO MUCH, AS TO DO SO THE SOFTWARE MIGHT HAVE ISSUES DURING THE AUTOMATIC ALIGNMENT

Edit-quad.gif

Click NextAction.png to access the alignment phase.

Alignment

As for all scanned items, the software tries to allign all the images to their reference. In this case the reference for all the scanned items is the articulator scan.

Align-quadrant.gif

At the end of the alingment the results are shown. To learn more on the automatic alignment and the manual procedure visit our Alignment Interface page.

Click NextAction.png to access the last step of the wizard.

Step 3: Mesh Generation and Export

At this point the software immediately starts mesh generation. The meshes can be edited and exported individually or as a unique image. To learn more about mesh editing visit our Mesh Tools page.

Click on the Export Button ExportToCadAction.png to export to CAD.

500px

If the project has been started from Exocad, the CAD will automatically open and the design can be started immediately. Otherwise the software will ask the user how to export the file.


Navigation Back.png Homebutton.png Navigation Next.png