Difference between revisions of "ExamplesMultidie/it"

From Dental Wiki
Jump to navigation Jump to search
(Created page with "Il software mostrerà come prima cosa il progetto creato in Exocad. Se il progetto è corretto, cliccare il pulsante Accetta {{Inline button|ok.png}}.")
(Created page with "==Definizione del progetto da ScanWay==")
Line 20: Line 20:
 
[[File:multidie-prj-check.gif]]
 
[[File:multidie-prj-check.gif]]
  
==Project definition starting from ScanWay==
+
==Definizione del progetto da ScanWay==
  
 
All projects can be defined in the scanning software as well, regardless the CAD that will be later on used to design.
 
All projects can be defined in the scanning software as well, regardless the CAD that will be later on used to design.

Revision as of 16:00, 22 June 2017


In questa pagina è mostrata e spiegata la procedura guidata da seguire per scansionare Monconi di diversi pazienti sullo stesso supporto multidie.

Definizione del progetto in Exocad

Per creare questo progetto in Exocad, cliccare sull'icona DentalDB sul desktop, aprendo così il Gestore Progetti. Fare click su Multi Die per aprire il pannello di definizione del progetto.

Per maggiori informazioni su come creare progetti in Exocad, visitare la pagina Exocad Wiki!

Di seguito la definizione di un progetto esempio:

Prj-exo-multidie.gif

Una volta che il progetto è stato definito è sufficiente cliccare su OPT nella sezione Azioni per avviare il software di scansione.

Il software mostrerà come prima cosa il progetto creato in Exocad. Se il progetto è corretto, cliccare il pulsante Accetta Ok.png.

Multidie-prj-check.gif

Definizione del progetto da ScanWay

All projects can be defined in the scanning software as well, regardless the CAD that will be later on used to design.

Launch the scanning software double-clicking on the ScanWay icon on your desktop. The Welcome Page will open; to create the project click on the first icon.

NewPrjIcon.png

For detailed information on how to define a project visit the specific page: Create a New Project.

Here is the definition of our demo project:

Prj-definition-multidie.gif

Both the project definitions described lead to the same wizard, which will be now followed step by step.

Step 1: Multidie Scan

This is the only scan step for this kind of project. As usual, this scan steps is divided into substeps.

Scan Step

Place the dies on the multidie plate as prompted by the scanner and click the Scan ButtonScanAction.png. Once the scan is finished the result will be shown.

Multidieprj-scan-steps.png

This scan has been performed with the Reference Rim. Everytime the user launches a scan for models, dies or markers, if the software recognises that the reference rim has not been used the following message shows.

Msg rr.png

The user can therefore decide whether to cancel the scan, put the reference rim on the model holder and start a new scan, or to scan without using the reference rim. For information on the reference rim visit the Accessories page.

Click NextAction.png to access the second part of the step.

Edit Step

This step allows to edit the aquired image; for detailed information on all the available options in this step visit the Edit Tools page.

The image at this step can be both edited or trimmed. In this case, various tools have been used.

Edit-multidieprj.gif

When you are satisfied with the result click NextAction.png to access the next wizard step.

Step 6: Mesh Generation and Export

At this point the software immediately starts mesh generation. The meshes can be edited and exported individually or as a unique image. To learn more about mesh editing visit our Mesh Tools page.

Click on the Export Button ExportToCadAction.png to export to CAD.

Mesh-gen-multi.png

If the project has been started from Exocad, the CAD will automatically open and the design can be started immediately. Otherwise the software will ask the user how to export the file.

Navigation Back.png Homebutton.png Navigation Next.png