Example: Quadrant Module

From Dental Wiki
Revision as of 08:55, 23 June 2017 by E.pasotti (talk | contribs) (Created page with "Inserire le informazioni del progetto, il tipo di ricostruzione che dovrà essere modellata e i parametri aggiuntivi. Per questo tipo di progetto assicurarsi che la '''Modalit...")
Jump to navigation Jump to search


In questa pagina è mostrata e spiegata la procedura guidata da seguire per scansionare 2 modelli di emiarcate in occlusione con 3 impianti, utilizzando il modulo Concept Quad di Open Technologies.

Questo modulo permette di scansionare emiarcate con fino a 4 monconi, in un progetto a 2 fase predefinito che permette di risparmiare fino alla metà del tempo.

QUESTO E' UN MODULO OPTIONAL OPEN TECHNOLOGIES: CHIEDI AL TUO RIVENDITORE COME OTTENERLO!!

Definizione del progetto in Exocad

Per creare questo progetto in Exocad, cliccare sull'icona DentalDB sul desktop, aprendo così il Gestore Progetti.

Inserire le informazioni del progetto, il tipo di ricostruzione che dovrà essere modellata e i parametri aggiuntivi. Per questo tipo di progetto assicurarsi che la Modalità Scansione sia impostata su Due modelli in occlusione; il tipo di modello verrà specificato in seguito nel software per avviare la procedura guidata corretta.

For further information on how to create projects in Exocad, visit the specific page on the Exocad Wiki!

Here is the project definition for our demo project:

Prj-definition-exo-quadrant.gif

Once the project has been defined just click OPT in the Actions section to launch the scanning software.
The first thing the scanning software shows is the project created in Exocad.

In order to activate the correct wizard, click on the Model Type icon and select the QuadrantModel.png option.
Click the Accept button Ok.png to save the changes and start the project.

Model-type-quadrant.gif

Project definition starting from ScanWay

All projects can be defined in the scanning software as well, regardless the CAD that will be later on used to design.

Launch the scanning software double-clicking on the ScanWay icon on your desktop. The Welcome Page will open; to create the project click on the first icon.

NewPrjIcon.png

For detailed information on how to define a project visit the specific page: Create a New Project.

Here is the definition of our demo project:

Prj-definition-quadrant.gif

Both the project definitions described lead to the same wizard, which will be now followed step by step.

Step 1: Articulator Scanning

In this case, for articulator, is meant the quadrant tray occlusor, which can be scanned directly on the normal model holder.
The user can decide freely how to place the occlusor on the model holder, here are our suggestions.

File:Occlusor-positions.png

Once the objects have been placed in the scanner (either the articulator or the models one on top of the other), the scan can be started with the Scan ButtonScanAction.png. Once the scan is finished the result will be shown.

Quadrant-articulator-steps.png

For further information on the other available functions check the Scan Interface page.

Click NextAction.png to access the second step of the wizard.

Step 2: Quadrant Scan

This step develops in the usual phases.

Scan

For this step, all the elements need to be positioned as marked by the software in the Quadrant holder.
Click the Scan ButtonScanAction.png to start the scan. Once the scan is finished the result will be shown.

Quadrant-steps.png

Click NextAction.png to access the edit step.

Edit

In this case, the image has been trimmed using the base cut tool and clicking on the apply button.

BE CAREFUL NOT TO TRIM TOO MUCH, AS TO DO SO THE SOFTWARE MIGHT HAVE ISSUES DURING THE AUTOMATIC ALIGNMENT

Edit-quad.gif

Click NextAction.png to access the alignment phase.

Alignment

As for all scanned items, the software tries to align all the images to their reference. In this case the reference for all the scanned items is the articulator scan.

Align-quadrant.gif

At the end of the alignment the results are shown. To learn more on the automatic alignment and the manual procedure visit our Alignment Interface page.

Click NextAction.png to access the last step of the wizard.

Step 3: Mesh Generation and Export

At this point the software immediately starts mesh generation. The meshes can be edited and exported individually or as a unique image. To learn more about mesh editing visit our Mesh Tools page.

Click on the Export Button ExportToCadAction.png to export to CAD.

Mesh-quadrant.png

If the project has been started from Exocad, the CAD will automatically open and the design can be started immediately. Otherwise the software will ask the user how to export the file.


Navigation Back.png Homebutton.png Navigation Next.png